It is currently Thu Mar 28, 2024 2:35 pm




Post new topic Reply to topic  [ 74 posts ]  Go to page 1, 2, 3, 4, 5  Next
Author Message
 Post subject: the Tool thread
PostPosted: Mon May 05, 2008 3:17 pm 
Offline
Supporting Member
User avatar

Joined: Sat Aug 20, 2005 3:27 pm
Posts: 3723
Location: Bristol,RI
I thought we could do a thread for people wanting to work on your rigs instead of having a dealer do it. In this thread I figured we could list some tools that will make your project a little easier. Now these are not necessary but like I mentioned they'll help ya out.

Now if you have any tools that are helpful then feel free to list em up.;)

Seal Driver - This is a great useful tool for the aid in setting your seals. Especially the seals on your hubs.
Image


Pitman arm puller - Here's a tool that's a must for removing your pitman arm.
Image

Seal Puller - Here's another useful tool that helps removing various seals. (one in particular the bearing seals when you re-pack your bearings)
Image

5lb. hammer aka BFH (big F**king Hammer) - Now this is truly a multi-tasker. It can be used for many many things. For example popping your ball joints out of your UCA's.
Image

Snap-ring pliers - here's another tool that's needed for removing and installing snap-rings.
Image


Pry bar set -This is another tool/tools that are multi-taskers
Image


Bearing retaining nut socket - This is a tool that's used to used to remove the bearing retaining nut that holds in the bearing and such.
Image

_________________
How many wrenches can one man own? Don't ask stupid questions.


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 05, 2008 3:44 pm 
Offline
Forum User

Joined: Wed Apr 16, 2008 11:54 pm
Posts: 500
Location: Long Island/Rhode Island
where can i get the socket for the hubs?

_________________
Richie

2001 SC CC Frontier
(half an xterra)

lift, tires, armor


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 05, 2008 3:50 pm 
Offline
Supporting Member
User avatar

Joined: Thu Aug 18, 2005 4:42 pm
Posts: 5700
Location: Oneonta, NY
silversuper wrote:
where can i get the socket for the hubs?


Buy one made for a GMC/Chevy half-ton truck at Autozone for about $10. Grind off two of the four ears and you have one.
...or you can order one for about $25 through Xterraparts.com


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 05, 2008 4:03 pm 
Offline
Supporting Member
User avatar

Joined: Thu Aug 18, 2005 4:42 pm
Posts: 5700
Location: Oneonta, NY
Good idea for a thread Gene.

As with many things, you can get by with other tools you have, but there's nothing like having the right tool for the job. One of the handiest all around tools I have is a good set of ViseGrips. I have about ten variations and they come in handy for a lot of tasks. Of course, the BFH solves about any problem.

If you do your rear brakes, these come in really handy. Again you can get by with pliers, screwdrivers and a lot of swearing, but these are worth having and saving a ton of effort,

Universal brake spring tool
Image

Brake Shoe Retainer Spring tool

Image

These tools are fairly inexpensive, mine are probably 30 years old, but they come in handy.


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 05, 2008 4:18 pm 
Offline
Supporting Member
User avatar

Joined: Sat Aug 20, 2005 3:27 pm
Posts: 3723
Location: Bristol,RI
Punches - these come in all different sizes and come in very handy. You can use them for all sorts of different projects. Like lining up bolt holes to getting a broken carter pin out of a bolt.
Image

Picks - These are usefull for all sorts of things.
Image

_________________
How many wrenches can one man own? Don't ask stupid questions.


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 05, 2008 4:57 pm 
Offline
Supporting Member
User avatar

Joined: Thu Aug 18, 2005 4:42 pm
Posts: 5700
Location: Oneonta, NY
The Fire Wrench: one of the most useful and overlooked tools.


Preferred:

Image

Acceptable:

Image

Works:

Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 05, 2008 8:00 pm 
Offline
Global Moderator
User avatar

Joined: Sun Jan 15, 2006 1:18 pm
Posts: 11640
Location: Brooklyn, NY
Image
Ball Joint/Universal Joint Press
Used one of these yesterday to press in a ball joint into the LCA. Made the job much easier. Would buy one but Autozone lent us one for $100 deposit. Left them $100 on my credit card, used it, brought it back and they credited my card the $100! Why buy one?

_________________
Bklyn.X
ImageImage
"...burning commentary of bullshit masquerading as insight."


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 05, 2008 9:17 pm 
Offline
Forum User
User avatar

Joined: Fri Sep 01, 2006 11:13 am
Posts: 1998
Location: DE, CT, NY
I have been to autozone recently and they will rent you tool for free (you pay for it and when you return it they credit you the money)

The list of tools you can use are on the mat on the counter at the checkout

_________________
My Xterra On Cardomain.com


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 05, 2008 10:24 pm 
Offline
Supporting Member
User avatar

Joined: Sat Aug 20, 2005 3:27 pm
Posts: 3723
Location: Bristol,RI
Here's something every tool box in the North East should have in it.

Anti-sieze - Used to put on the threads of bolts to prevent them from getting locked on due to rust.
Image

_________________
How many wrenches can one man own? Don't ask stupid questions.


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 05, 2008 10:30 pm 
Offline
Supporting Member
User avatar

Joined: Sat Aug 20, 2005 3:27 pm
Posts: 3723
Location: Bristol,RI
Brake 4-piston spreader - Here's a tool that makes spreading the pistons open on a 4-piston caliper.
Image

_________________
How many wrenches can one man own? Don't ask stupid questions.


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 05, 2008 10:36 pm 
Offline
Forum User
User avatar

Joined: Wed Aug 02, 2006 4:46 pm
Posts: 581
Location: Farmington, CT
I agree, this was a great idea for a thread. :thumbup:

_________________
=> Joe <=

"The Retired General Weee"


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 06, 2008 9:53 am 
Offline
Global Moderator
User avatar

Joined: Sun Jan 15, 2006 1:18 pm
Posts: 11640
Location: Brooklyn, NY
Damn Gene, do you have all the tools you've listed?
Image

I think having basic air tools (impact wrench, ratchet and air hammer) is a major plus. Saves sooo much time, I even carry the tools on the trail!

_________________
Bklyn.X
ImageImage
"...burning commentary of bullshit masquerading as insight."


Last edited by Bklyn.X on Tue May 06, 2008 10:01 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Tue May 06, 2008 11:37 am 
Offline
Supporting Member
User avatar

Joined: Sat Aug 20, 2005 3:27 pm
Posts: 3723
Location: Bristol,RI
Tom not all. I'm working on getting the Seal driver kit. Which you can find all over Ebay for pretty cheap and getting the 4-piston spreader. That made compressing the calipers easy. Especially on our calipers that don't have the wholes to allow the use of alot of other compressors.

_________________
How many wrenches can one man own? Don't ask stupid questions.


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 06, 2008 3:55 pm 
Offline
Club President
User avatar

Joined: Mon Mar 31, 2008 10:54 am
Posts: 9987
Location: Brockton, MA
Perhaps this thread should be pinned?

_________________
Welcome Aboard the Black Pearl!


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 06, 2008 6:25 pm 
Offline
Forum User
User avatar

Joined: Sun Dec 18, 2005 12:23 am
Posts: 596
Location: Reading, MA
silversuper wrote:
where can i get the socket for the hubs?

here

The Pitman Arm puller also works on the idler arm, and can be used to remove the tie rod ends as well.

Bearing Packer
Image
Image

Torque Wrench
Image

C-Clamps - good for loosening calipers, and for holding spring packs together, or keeping skids in place while you drill - amongst other things.
Image

A dremel - multiple uses, but can be used with a cutting disk to resize/reshape a bolt head, or cut one off.
Image

EZ Out bits - for getting broken screws/bolts out.
Image

Impact Screwdriver - helps to get those stuck/frozen screws out without stripping them
Image


Combo wire strippers/cutters/crimpers.
(no pic)

Soldering Gun
Image

_________________
Jeffrey and Rockaholic
I'm just trying to put my tires on the rocks of life
Baseball is my Religion; Fenway Park is my place of worship.
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 74 posts ]  Go to page 1, 2, 3, 4, 5  Next

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Theme designed by stylerbb.net & programy © 2008
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
[ Time : 0.285s | 14 Queries | GZIP : Off ]
All times are UTC - 5 hours