I thought we could do a thread for people wanting to work on your rigs instead of having a dealer do it. In this thread I figured we could list some tools that will make your project a little easier. Now these are not necessary but like I mentioned they'll help ya out.
Now if you have any tools that are helpful then feel free to list em up.
Seal Driver - This is a great useful tool for the aid in setting your seals. Especially the seals on your hubs.
Pitman arm puller - Here's a tool that's a must for removing your pitman arm.
Seal Puller - Here's another useful tool that helps removing various seals. (one in particular the bearing seals when you re-pack your bearings)
5lb. hammer aka BFH (big F**king Hammer) - Now this is truly a multi-tasker. It can be used for many many things. For example popping your ball joints out of your UCA's.
Snap-ring pliers - here's another tool that's needed for removing and installing snap-rings.
Pry bar set -This is another tool/tools that are multi-taskers
Bearing retaining nut socket - This is a tool that's used to used to remove the bearing retaining nut that holds in the bearing and such.