| North East Xterra Club https://www.nexterra.org/forums/ |
|
| My Pathfinder build. https://www.nexterra.org/forums/viewtopic.php?f=71&t=8387 |
Page 5 of 5 |
| Author: | Rusty [ Thu Oct 06, 2022 12:16 pm ] |
| Post subject: | Re: My Pathfinder build. |
Lots of updates to post. I finally finished up my sway bar disconnects. I installed them and they broke going around the block unfortunately. A fix for this is i'm going to weld it at the joint and see how that does. I've been rolling around without a sway bar since i've purchased it and am pretty much used to it by now, but would still like to re install the sway bar and have disconnects. Sent from my SM-N975U1 using Tapatalk   
|
|
| Author: | Rusty [ Thu Oct 06, 2022 12:34 pm ] |
| Post subject: | Re: My Pathfinder build. |
Finally got my land rover springs that i ordered from england aswell. They have a higher spring rate than what I currently have installed . Goal here is that it wont sag when I put all my tools in the back. Also got around to installing my new steering linkage from woodward. It tightened up the steering a lot more , feels like the old pathy now.     Sent from my SM-N975U1 using Tapatalk |
|
| Author: | MtDewMike [ Fri Nov 18, 2022 9:05 pm ] |
| Post subject: | Re: My Pathfinder build. |
Looking good! |
|
| Author: | Rusty [ Sun Jan 22, 2023 1:08 pm ] |
| Post subject: | Re: My Pathfinder build. |
MtDewMike wrote: Looking good! Appreciate it!I Hate the snow, but the path does look good in it  Sent from my SM-N975U1 using Tapatalk |
|
| Author: | Rusty [ Sun Jan 22, 2023 1:14 pm ] |
| Post subject: | Re: My Pathfinder build. |
My brake caliper has been sticking the past couple days, decided to use ol rusty and steal the good caliper off it and swap it to the new rig. Got a nice firm brake pedal now(still not the greatest I think my master is going ) I find myself washing this thing almost everyday due to no flaps and the oversized tires flinging the salt all over the body Also sprayed the whole underbody before the snow started falling with fluid film. Haven't really been impressed with it as it seems like it washes off easily and I have to keep re applying. Next season I'm going to get NHOU back to black . Heard great reviews about them .     Sent from my SM-N975U1 using Tapatalk |
|
| Author: | MtDewMike [ Fri Jan 27, 2023 12:02 pm ] |
| Post subject: | Re: My Pathfinder build. |
The truck's looking really good! Thanks for the tip on the NHOU! |
|
| Author: | TKX [ Sat Jan 28, 2023 9:39 am ] |
| Post subject: | Re: My Pathfinder build. |
Truck looks great Sent from my SM-G991U1 using Tapatalk |
|
| Author: | Rusty [ Wed Mar 06, 2024 8:10 am ] |
| Post subject: | Re: My Pathfinder build. |
Haven't posted updates in a while, but recently I got the spare tire mounted higher on the factory carrier. I hole sawed part of the mount so it would hug around the tube (cut way too much but you live and learn) then got a piece of angle stock and welded it all around to the mount. Will eventually put a piece of square tubing and bolt it through. Until my welds get better. For now I'll keep bringing it to people with experience .       ^ This was just done, it has welds completely on the end of the angle stock and mount now. Sent from my Pixel 7 Pro using Tapatalk |
|
| Author: | MtDewMike [ Wed Mar 06, 2024 10:04 am ] |
| Post subject: | Re: My Pathfinder build. |
Nice! Those tires are 33's? |
|
| Author: | Rusty [ Wed Mar 06, 2024 10:26 am ] |
| Post subject: | Re: My Pathfinder build. |
MtDewMike wrote: Nice! Those tires are 33's? 35s on a 15 in rim Sent from my Pixel 7 Pro using Tapatalk |
|
| Author: | MtDewMike [ Wed Mar 06, 2024 10:49 am ] |
| Post subject: | Re: My Pathfinder build. |
Rusty wrote: MtDewMike wrote: Nice! Those tires are 33's? 35s on a 15 in rim Sent from my Pixel 7 Pro using Tapatalk Gotcha. I was leaning towards 35, but saw the stats in your signature. 
|
|
| Author: | Rusty [ Wed Mar 06, 2024 10:51 am ] |
| Post subject: | Re: My Pathfinder build. |
MtDewMike wrote: Rusty wrote: MtDewMike wrote: Nice! Those tires are 33's? 35s on a 15 in rim Sent from my Pixel 7 Pro using Tapatalk Gotcha. I was leaning towards 35, but saw the stats in your signature.  I have to update that lolSent from my Pixel 7 Pro using Tapatalk |
|
| Author: | chatnavz [ Wed Mar 06, 2024 9:23 pm ] |
| Post subject: | Re: My Pathfinder build. |
Nice build man. I wanna see that Pathfinder this coming July lol Sent from my iPhone using Tapatalk |
|
| Author: | Rusty [ Wed Mar 06, 2024 9:35 pm ] |
| Post subject: | Re: My Pathfinder build. |
chatnavz wrote: Nice build man. I wanna see that Pathfinder this coming July lol Trying my best to get it down there. I still need skid plates and to hasically re-do my whole front end. Sent from my iPhone using Tapatalk Plus a rear main seal leak and valve covers lol Sent from my Pixel 7 Pro using Tapatalk |
|
| Page 5 of 5 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|