North East Xterra Club https://www.nexterra.org/forums/ |
|
The XTerrance (AKA "Calliope's Revenge", AKA "The Draggin'") https://www.nexterra.org/forums/viewtopic.php?f=71&t=5464 |
Page 2 of 8 |
Author: | theplasticone [ Wed Feb 22, 2012 4:38 pm ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge") |
Updated again, with more Plasti-Dip! Full plastics blackout plus green side steps and grille sections: Was thinking about doing the bumper too, but I ran out of 'Dip as I finished the bumper step so I figured I'd leave it for another day (or keep it the way it is). Also Dipped the hook: At this point I'm very strongly considering spraying the rest of the truck with clear Plasti-Dip and seriously changing my name to ThePlastiDippedOne. |
Author: | TomsRedX [ Sat Mar 03, 2012 11:23 pm ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge") |
I'm liking the grill, nice job. |
Author: | theplasticone [ Wed Apr 11, 2012 11:45 am ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge"/X-Cavator) |
Throwing up a few pics from Fools Run: |
Author: | MtDewMike [ Wed Apr 11, 2012 11:55 am ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge") |
Looks good dirty! |
Author: | MtDewMike [ Tue Jun 19, 2012 7:17 am ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge") |
Cool! Looks good, Terrance! |
Author: | theplasticone [ Thu Jan 31, 2013 9:20 pm ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge") |
So here's my general plan for 2013. For the front, my Dually Dam (as described in this thread) and yellow fog lights in the bumper mouth. The fogs are mostly for looks, so I'm going to go the frugal route and get this and remove the lights from the housing (maybe upgrade the bulbs). I'll do my own bumper mouth bracket. And here's the back Drop-'n-swing tire carrier as described in this thread, welded on top of my recovery tabs. License plate relocated to the swing arm, with a 6"-12" light bar in the license plate well. Then I'll finally wire up my auxiliary brake/turn signals on the roof. So that's the major stuff. Somewhere in all of that I'm going to fit in some adjustable shackles and maybe 1/2" or 1" spacers up front, then it's time for Duratracs! Thoughts? |
Author: | MtDewMike [ Fri Feb 01, 2013 8:56 pm ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge") |
I like the ideas, Terrance, and look forward to seeing the progress! |
Author: | SE-Rooney [ Thu Apr 04, 2013 9:32 pm ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge") |
Nice lights what those set you back if you dont mind me asking ? |
Author: | theplasticone [ Thu Apr 04, 2013 10:21 pm ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge") |
http://www.superbrightleds.com/moreinfo ... 1160/2755/ (also available: http://www.superbrightleds.com/moreinfo ... 1161/2756/) |
Author: | DC xterra [ Fri Apr 05, 2013 3:33 am ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge") |
they look great! i gotta say light bars are calling me |
Author: | MtDewMike [ Fri Apr 05, 2013 10:47 am ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge") |
Terrance, did you fab up those bars yourself? |
Author: | theplasticone [ Sun Apr 07, 2013 9:56 pm ] |
Post subject: | Re: The XTerrance (AKA "Calliope's Revenge") |
I did in fact make the cages myself. Some images from this weekend: |
Page 2 of 8 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |