North East Xterra Club https://www.nexterra.org/forums/ |
|
XterraVT https://www.nexterra.org/forums/viewtopic.php?f=71&t=4544 |
Page 1 of 2 |
Author: | DaveP [ Sun Feb 07, 2010 2:36 pm ] |
Post subject: | XterraVT |
Had no clue I never did a "Show Your Ride" and I'm Bored right now at work. Username: XterraVT Year: 2005 Make: Nissan Model: Xterra Trim: OR Color: Super Black Mods Interior: Pioneer Avic - 90BT ( In-dash Nav/ DVD ) Polk MMC690 front speakers Polk MMC650 rear speakers JL Audio M4500 4 channel marine amp Scan Gauge II Cobra WXST 75 CB FireStik II antenna Lobo Shelf SuperBriteLED Interior lights Exterior: Shrockworks Front Bumper Shrockworks Sliders Shrockworks Skids Shrockworks Rear Bumper w/ Tire Carrier Blue Torch FabWorks Diff Cover Mile Marker 8000 winch w/ Amsteel Blue Line Nissan Window Vents Baja Replacement Rack Gobi Ladder w/ HD struts Set 1 - Pro Comp 7089s 16x8 Set 1 - BF Goodrich A/T KOs 285/75/16s - Letters Out Set 2 - Pro Comp 7089s 16x8 Set 2 - BF Goodrich M/T KM2s 315/75/16s - Letters Out Hella Rally 4000 Compact driving - 4 Roof Hella Rally 4000 FF Driving - Bumper Hella FF75 Fogs - Rear Hella Supertone Horn 118db Diff breather Mod Suspension: Total Chaos UCAs Radflo Coilovers w/ 750lb springs Alcan Replacement Leaves 200+ over stock PRG Adjustable Shackles Radflo extended rear shocks ACs 2? B/L Removed Rear Sway Bar Performance: Snorkel Volant CAI Flow Master Super 40 Muffler Stillen Sport Rotors and Metal Matrix Pads SS Brake Lines Trail Gear: Power Tank #10 w/ HPX regulator and HD tire inflator Master Flow 1050 Tsunami compressor ( Back-up to CO2 ) True Temper Shovel ( Fiberglass ) True Temper Axe ( Fiberglass ) Scepter Fuel Cans ( 5 ) Scepter Water Can ( 1 ) Hi-Lift Extreme w/ OR base Pro Comp 2? x 30? Strap Pro Comp Tree Saver Strap ARB Snatch Block ARB Tire Repair kit Pelican 1520 case ( Extra fluids ? Brake, Oil, Diff, Steering ? ) Pelican 1620 case ( Tools/ Air tools and small parts ) Pelican 1700 case ( roof mount for trail gear ) Comments: What an amazing vehicle. It takes me where I want to go every time and can't wait till the next adventure it takes me on. Photos: Too Clean Baja Rack Action Rausch Creek (Yellow Jacket) Lake Christy X-Fest in VA Rausch Creek Rausch Creek 1st Gen Recovery Vehicle To be continued!!! Shhhhhhh - New OBA Mod coming soon |
Author: | Big E 515 [ Sun Feb 07, 2010 4:22 pm ] |
Post subject: | |
Very nice! I want to get one of those light bars....soon! OBA mod? on board air? |
Author: | Svendog [ Sun Feb 07, 2010 5:03 pm ] |
Post subject: | |
Very nice write up and, as I know, great rig. |
Author: | XVTer [ Sun Feb 07, 2010 5:56 pm ] |
Post subject: | |
Nice |
Author: | squibleearmorx [ Sun Feb 07, 2010 7:04 pm ] |
Post subject: | |
nice bro. love your truck. |
Author: | inliner [ Sun Feb 07, 2010 8:11 pm ] |
Post subject: | |
Truck looks awesome. |
Author: | rroadkilll [ Sun Feb 07, 2010 11:34 pm ] |
Post subject: | |
LOOKING good!!! |
Author: | Bklyn.X [ Mon Feb 08, 2010 12:03 am ] |
Post subject: | |
Truck looks great Dave. |
Author: | DaveP [ Mon Feb 08, 2010 8:38 pm ] |
Post subject: | |
Thanks guys Ya, On Board Air Mod! I still need to talk to someone about our secret box in the back of the X. I need to know if I can cut the entire box out and making it deeper without weakening anything. 22" x 22" x 8" Should be enough for a 100% duty cycle compressor, 2# tank and Just maybe with some Hopes and Dreams a battery will fit. LOL Crossing my fingers |
Author: | MtDewMike [ Tue Feb 09, 2010 1:27 pm ] |
Post subject: | |
Dave, didn't Muzikman put OBA in that same location? You may want to check in with him for some details. |
Author: | Trailz [ Mon Mar 01, 2010 8:53 am ] |
Post subject: | |
XterraVT wrote: Thanks guys
Ya, On Board Air Mod! I still need to talk to someone about our secret box in the back of the X. I need to know if I can cut the entire box out and making it deeper without weakening anything. 22" x 22" x 8" Should be enough for a 100% duty cycle compressor, 2# tank and Just maybe with some Hopes and Dreams a battery will fit. LOL Crossing my fingers Now I'm intrigued.... I got my Viair 200 PSI rated, 100% duty cycle 480C compressor.... If I had to do it again, not sure i'd buy that big of a compressor.... It's pretty big... & not sure where to install it... That secret box that you can cut out sure got my attention! Where is this "secret" box? |
Author: | MtDewMike [ Mon Mar 01, 2010 12:56 pm ] |
Post subject: | |
Trailz wrote: That secret box that you can cut out sure got my attention!
Where is this "secret" box? That's only on the second gens. |
Author: | Trailz [ Mon Mar 01, 2010 4:16 pm ] |
Post subject: | |
mtdewmike wrote: Trailz wrote: That secret box that you can cut out sure got my attention! Where is this "secret" box? That's only on the second gens. Super!!! |
Author: | squibleearmorx [ Tue Mar 02, 2010 12:45 pm ] |
Post subject: | |
muzikman has his mounted up in the spare tire location with a skid plate protecting the tank. |
Author: | Trailz [ Tue Mar 02, 2010 6:03 pm ] |
Post subject: | |
squibleearmorx wrote: muzikman has his mounted up in the spare tire location with a skid plate protecting the tank.
Yeah... so far, that's the plan... just don't want a rock or something piercing the tank with 200p of pressure!!!! I don't have my skids yet... not too sure when my buddy from Montreal is bringing them..... I just can't take a decision!!!! |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |