North East Xterra Club
https://www.nexterra.org/forums/

XterraVT
https://www.nexterra.org/forums/viewtopic.php?f=71&t=4544		 Page 1 of 2
Author:  DaveP [ Sun Feb 07, 2010 2:36 pm ]
Post subject:  XterraVT
Had no clue I never did a "Show Your Ride" and I'm Bored right now at work.

Username: XterraVT
Year: 2005
Make: Nissan
Model: Xterra
Trim: OR
Color: Super Black

Mods

Interior:
Pioneer Avic - 90BT ( In-dash Nav/ DVD )
Polk MMC690 front speakers
Polk MMC650 rear speakers
JL Audio M4500 4 channel marine amp
Scan Gauge II
Cobra WXST 75 CB
FireStik II antenna
Lobo Shelf
SuperBriteLED Interior lights

Exterior:
Shrockworks Front Bumper
Shrockworks Sliders
Shrockworks Skids
Shrockworks Rear Bumper w/ Tire Carrier
Blue Torch FabWorks Diff Cover
Mile Marker 8000 winch w/ Amsteel Blue Line
Nissan Window Vents
Baja Replacement Rack
Gobi Ladder w/ HD struts
Set 1 - Pro Comp 7089s 16x8
Set 1 - BF Goodrich A/T KOs 285/75/16s - Letters Out
Set 2 - Pro Comp 7089s 16x8
Set 2 - BF Goodrich M/T KM2s 315/75/16s - Letters Out
Hella Rally 4000 Compact driving - 4 Roof
Hella Rally 4000 FF Driving - Bumper
Hella FF75 Fogs - Rear
Hella Supertone Horn 118db
Diff breather Mod

Suspension:
Total Chaos UCAs
Radflo Coilovers w/ 750lb springs
Alcan Replacement Leaves 200+ over stock
PRG Adjustable Shackles
Radflo extended rear shocks
ACs 2? B/L
Removed Rear Sway Bar

Performance:
Snorkel
Volant CAI
Flow Master Super 40 Muffler
Stillen Sport Rotors and Metal Matrix Pads
SS Brake Lines

Trail Gear:
Power Tank #10 w/ HPX regulator and HD tire inflator
Master Flow 1050 Tsunami compressor ( Back-up to CO2 )
True Temper Shovel ( Fiberglass )
True Temper Axe ( Fiberglass )
Scepter Fuel Cans ( 5 )
Scepter Water Can ( 1 )
Hi-Lift Extreme w/ OR base
Pro Comp 2? x 30? Strap
Pro Comp Tree Saver Strap
ARB Snatch Block
ARB Tire Repair kit
Pelican 1520 case ( Extra fluids ? Brake, Oil, Diff, Steering ? )
Pelican 1620 case ( Tools/ Air tools and small parts )
Pelican 1700 case ( roof mount for trail gear )



Comments:
What an amazing vehicle. It takes me where I want to go every time and can't wait till the next adventure it takes me on.

Photos:
Too Clean
Image
Baja Rack
Image

Action

Rausch Creek (Yellow Jacket)
Image
Lake Christy
Image
X-Fest in VA
Image
Rausch Creek
Image
Rausch Creek
Image
1st Gen Recovery Vehicle
Image

To be continued!!!

Shhhhhhh - New OBA Mod coming soon
Author:  Big E 515 [ Sun Feb 07, 2010 4:22 pm ]
Post subject: 
Very nice! I want to get one of those light bars....soon!
OBA mod? on board air?
Author:  Svendog [ Sun Feb 07, 2010 5:03 pm ]
Post subject: 
Very nice write up and, as I know, great rig.
Author:  XVTer [ Sun Feb 07, 2010 5:56 pm ]
Post subject: 
Nice :thumbup:
Author:  squibleearmorx [ Sun Feb 07, 2010 7:04 pm ]
Post subject: 
nice bro. love your truck.
Author:  inliner [ Sun Feb 07, 2010 8:11 pm ]
Post subject: 
Truck looks awesome.
Author:  rroadkilll [ Sun Feb 07, 2010 11:34 pm ]
Post subject: 
LOOKING good!!!
Author:  Bklyn.X [ Mon Feb 08, 2010 12:03 am ]
Post subject: 
Truck looks great Dave.
Author:  DaveP [ Mon Feb 08, 2010 8:38 pm ]
Post subject: 
Thanks guys

Ya, On Board Air Mod!

I still need to talk to someone about our secret box in the back of the X. I need to know if I can cut the entire box out and making it deeper without weakening anything.

22" x 22" x 8"
Should be enough for a 100% duty cycle compressor, 2# tank and Just maybe with some Hopes and Dreams a battery will fit. LOL

Crossing my fingers
Author:  MtDewMike [ Tue Feb 09, 2010 1:27 pm ]
Post subject: 
Dave, didn't Muzikman put OBA in that same location? You may want to check in with him for some details.
Author:  Trailz [ Mon Mar 01, 2010 8:53 am ]
Post subject: 
XterraVT wrote:
Thanks guys

Ya, On Board Air Mod!

I still need to talk to someone about our secret box in the back of the X. I need to know if I can cut the entire box out and making it deeper without weakening anything.

22" x 22" x 8"
Should be enough for a 100% duty cycle compressor, 2# tank and Just maybe with some Hopes and Dreams a battery will fit. LOL

Crossing my fingers


Now I'm intrigued.... I got my Viair 200 PSI rated, 100% duty cycle 480C compressor.... If I had to do it again, not sure i'd buy that big of a compressor.... It's pretty big... & not sure where to install it... That secret box that you can cut out sure got my attention!
Where is this "secret" box?
Author:  MtDewMike [ Mon Mar 01, 2010 12:56 pm ]
Post subject: 
Trailz wrote:
That secret box that you can cut out sure got my attention!
Where is this "secret" box?

That's only on the second gens.
Author:  Trailz [ Mon Mar 01, 2010 4:16 pm ]
Post subject: 
mtdewmike wrote:
Trailz wrote:
That secret box that you can cut out sure got my attention!
Where is this "secret" box?

That's only on the second gens.


Super!!!
Author:  squibleearmorx [ Tue Mar 02, 2010 12:45 pm ]
Post subject: 
muzikman has his mounted up in the spare tire location with a skid plate protecting the tank.
Author:  Trailz [ Tue Mar 02, 2010 6:03 pm ]
Post subject: 
squibleearmorx wrote:
muzikman has his mounted up in the spare tire location with a skid plate protecting the tank.


Yeah... so far, that's the plan... just don't want a rock or something piercing the tank with 200p of pressure!!!!
I don't have my skids yet... not too sure when my buddy from Montreal is bringing them.....
I just can't take a decision!!!!
Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/