North East Xterra Club https://www.nexterra.org/forums/ |
|
Fiachra's X https://www.nexterra.org/forums/viewtopic.php?f=71&t=6592 |
Page 3 of 15 |
Author: | Fiachra [ Mon Sep 24, 2012 5:52 pm ] |
Post subject: | Re: Fiachra/Dave's 04 X |
If anyone can give an example of the 1st gen eng/trans Shrock u-bolt plates required I would greatly appreciate it. I saw the link in a past thread that directed me to the stainless u-bolts just would like a visual on the plates. |
Author: | Constitution [ Mon Sep 24, 2012 7:23 pm ] |
Post subject: | Re: Fiachra/Dave's 04 X |
Off hand without going out in the dark to measure them or anything....They're basically just flat pieces of steel with holes drilled in them to accept the u bolts. They're maybe 1/8" thick?? I hope this helps you. |
Author: | Fiachra [ Mon Sep 24, 2012 8:26 pm ] |
Post subject: | Re: Fiachra/Dave's 04 X |
Constitution wrote: Off hand without going out in the dark to measure them or anything....They're basically just flat pieces of steel with holes drilled in them to accept the u bolts. They're maybe 1/8" thick?? I hope this helps you. That does help, thanks. |
Author: | Fiachra [ Tue Sep 25, 2012 7:01 pm ] |
Post subject: | Re: Fiachra/Dave's 04 X |
Cleaning up the skids I got from Derek. Rome was not built in a day. Got some frame paint on one side at least. These are a great jump start. |
Author: | Fiachra [ Wed Sep 26, 2012 7:01 pm ] |
Post subject: | Re: Fiachra/Dave's 04 X |
Other side tonight. |
Author: | Fiachra [ Fri Oct 05, 2012 11:17 am ] |
Post subject: | Re: Fiachra's X |
DirtySocks wrote: In case you didnt see it, There was a set of sliders for sale if you are looking to buy. Check the For Sale thread. Thanks! |
Author: | Fiachra [ Sat Oct 06, 2012 5:52 pm ] |
Post subject: | Re: Fiachra/Dave's 04 X |
Completed acquisition of Shrockworks skids and sliders. Painted one side with rust shield. Before: After: |
Author: | MtDewMike [ Sun Oct 07, 2012 11:30 am ] |
Post subject: | Re: Fiachra/Dave's 04 X |
Looks like the mod bug has bit you big time, Dave! |
Author: | Fiachra [ Sun Oct 07, 2012 3:58 pm ] |
Post subject: | Re: Fiachra/Dave's 04 X |
mtdewmike wrote: Looks like the mod bug has bit you big time, Dave! You know, things just started falling into place. It was where I was headed anyway and I saved some serious dough by being aware of the market. Now I just need to get everything on. I'm mechanically challenged and it may take a day but I'm going to remain optimistic. Edit: Just put the sliders on. That was not easy lining up those holes. Lol |
Author: | DirtySocks [ Sun Oct 07, 2012 8:28 pm ] |
Post subject: | Re: Fiachra/Dave's 04 X |
Author: | TomsRedX [ Mon Oct 08, 2012 10:29 pm ] |
Post subject: | Re: Fiachra/Dave's 04 X |
Use a floor jack for that big skid, makes things much easier. |
Author: | Fiachra [ Tue Oct 09, 2012 5:01 am ] |
Post subject: | Re: Fiachra/Dave's 04 X |
TomsRedX wrote: Use a floor jack for that big skid, makes things much easier. Thanks for the tip. That was the plan. Yesterday I failed to get the OEM fuel tank skid off, one bolt just would not give after multiple PB Blaster soakings. In a holding pattern now. |
Author: | Fiachra [ Mon Oct 15, 2012 5:09 pm ] |
Post subject: | Re: Fiachra/Dave's 04 X |
All skids are on now. It's a good feeling. |
Author: | Fiachra [ Thu Nov 15, 2012 6:56 am ] |
Post subject: | Re: Fiachra's X |
Updated my to-do list above. Also one item that was not on the list, installed a Draw-Tite class 3 rear hitch a couple weeks ago. Hope I don't need it but had I not done it I surely would have. Ordered the kit moments ago w/new brake lines and have found a shop do the 3" suspension lift. |
Author: | MtDewMike [ Thu Nov 15, 2012 1:27 pm ] |
Post subject: | Re: Fiachra's X |
Fiachra wrote: Ordered the kit moments ago w/new brake lines and have found a shop do the 3" suspension lift. Nice, Dave! Looking forward to pictures! |
Page 3 of 15 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |