North East Xterra Club https://www.nexterra.org/forums/ |
|
Carpy's X https://www.nexterra.org/forums/viewtopic.php?f=71&t=9831 |
Page 2 of 3 |
Author: | Carpy [ Wed Apr 15, 2020 3:39 pm ] |
Post subject: | Re: New design |
Bklyn.X wrote: Man that's really nice work. I've been hesitating doing something on my truck for years. My rockers are toasted. Sometimes it's better to just get out there and get'er done. Probably be easier to get the rocker pieces and rivet them in.its time consuming, but ive done it couple hundred times working at autobody shops.Sent from my VS988 using Tapatalk |
Author: | Carpy [ Wed Apr 15, 2020 3:41 pm ] |
Post subject: | Re: Something new |
DirtySocks wrote: Nice. I like it. It took 1/2 hour per side to cut the steel bumper wings off with a sawzall. Thats some thick steel man!Sent from my iPhone using Tapatalk Sent from my VS988 using Tapatalk |
Author: | Carpy [ Wed Apr 15, 2020 4:50 pm ] |
Post subject: | Re: Something new |
Here is the flush cut result. Planning per weather this weekend, rocker guarding front bumper and other stuff. Sent from my VS988 using Tapatalk |
Author: | MtDewMike [ Fri Apr 17, 2020 12:29 pm ] |
Post subject: | Re: Something new |
Hmm, now that's different and new. |
Author: | MtDewMike [ Fri Apr 17, 2020 12:31 pm ] |
Post subject: | Re: New design |
How long does that stuff have to set for? |
Author: | Carpy [ Fri Apr 17, 2020 12:36 pm ] |
Post subject: | Re: New design |
MtDewMike wrote: How long does that stuff have to set for? The correct epoxy primer to use in this application, would be used with air compressor and spray gun. I used vht epoxy. So it probably wont last long. So im going to use rocker guard to give it a rugged look. I did the sliders and rockers with it, and it seems to be pretty bullet proof!Sent from my VS988 using Tapatalk |
Author: | Carpy [ Fri Apr 17, 2020 12:37 pm ] |
Post subject: | Re: New design |
Carpy wrote: MtDewMike wrote: How long does that stuff have to set for? The correct epoxy primer to use in this application, would be used with air compressor and spray gun. I used vht epoxy. So it probably wont last long. So im going to use rocker guard to give it a rugged look. I did the sliders and rockers with it, and it seems to be pretty bullet proof!Sent from my VS988 using Tapatalk Sent from my VS988 using Tapatalk |
Author: | Carpy [ Sun Apr 19, 2020 8:25 pm ] |
Post subject: | Did some more painting. |
Yup, did some more stuff today. Scuffed down front bumper, and used the textured black paint (rocker guard), then scuffed down rear bumper and sides, and painted them with stainless black paint. Came out awsome. Also did bumper step pads with black epoxy spray paint. Not a fan of the out come of those, so im gonna get more of the textured and tackle that anouther day. Then finished off the eavining with an oil change. Im all tuckered out. Sent from my VS988 using Tapatalk |
Author: | Carpy [ Tue Apr 21, 2020 6:40 am ] |
Post subject: | Grill done also. |
Now I feel feel better. Now time to buff and wax! Sent from my VS988 using Tapatalk |
Author: | TKX [ Tue Apr 21, 2020 7:48 am ] |
Post subject: | Re: Grill done also. |
That looks really good...I've seen a few online with that cut on the front bumper it's a good idea. Nice paint and body work too...my metal bumpers require some serious love soon,lots of surface rust. Sent from my SM-G950U using Tapatalk |
Author: | Carpy [ Tue Apr 21, 2020 7:54 am ] |
Post subject: | Re: Grill done also. |
TKX wrote: That looks really good...I've seen a few online with that cut on the front bumper it's a good idea. Nice paint and body work too...my metal bumpers require some serious love soon,lots of surface rust. Thank you, it was a little project, and having the time to do it was great.Sent from my SM-G950U using Tapatalk Sent from my VS988 using Tapatalk |
Author: | MtDewMike [ Tue Apr 21, 2020 12:41 pm ] |
Post subject: | Re: Grill done also. |
Looks good. Nice work. |
Author: | Inurteeth2 [ Tue Apr 21, 2020 11:35 pm ] |
Post subject: | Re: Did some more painting. |
Looks good. |
Author: | Carpy [ Thu Apr 23, 2020 11:55 am ] |
Post subject: | Re: Grill done also. |
MtDewMike wrote: Looks good. Nice work. Thanks Mike.Sent from my VS988 using Tapatalk |
Author: | Carpy [ Sun Apr 26, 2020 7:43 am ] |
Post subject: | Shiny |
So I got the buffer out and compounded,polished and waxed up the X. Came out great. Sent from my VS988 using Tapatalk |
Page 2 of 3 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |