It is currently Tue Jun 18, 2024 10:09 am




Post new topic Reply to topic  [ 221 posts ]  Go to page Previous  1 ... 11, 12, 13, 14, 15
Author Message
 Post subject: Re: Bklyn.X
PostPosted: Thu Mar 30, 2023 11:49 am 
Offline
Global Moderator
User avatar

Joined: Sun Jan 15, 2006 1:18 pm
Posts: 11637
Location: Brooklyn, NY
Here’s a new Bklyn.X story for you:

I noticed my d44 front diff was leaking. Most likely a result of continuously smacking it against rocks and boulders while off roading (bad driving :roll: ). I’m too embarrassed to post a picture of it so you’re not getin’ one. Instead here’s a pic of the housing after I took the cover off and hid it from site:

Image

I decided to replace the beat-to-shit cover with a new one instead of just taking the beat up one off, cleaning it and putting it back on with fresh RTV. I also decided to try a LubeLocker Gasket instead of my typical incompetent “Jackson Pollock” looking RTV mess.

Image

Not being satisfied doing this simple job in a normally short and uneventful manner I cross-threaded one of the cover bolts during installation. This fucked up one of the receiving holes in the housing. Although I did not put a wrench on the bolt, just hand tightening, it fucked it up enough that I couldn’t get a new bolt to start correctly even after taking the cover off.

I must admit with the vision of replacing my entire d44 with its custom welded perches running through my brain I was near tears. :cry:

I used a pick to try to chase the zanged threads with little success.

I measured the bolt, 5/16-18, and headed over to Lowe’s with a prayer and found a proper sized IRWIN Hanson 2-Pack SAE Tap and Drill Set. Even though I didn’t need the drill bit for $8 WTF.

This tap has IRWIN’s “exclusive self-aligning feature, ensures a straight thread every time”. Oh yeah, we’ll see about that.
Not for nothing it worked great! It caught the inside threads and “chased” the whole thing beautifully without cutting anything new/different. :D

Image

Image

Saved! I highly recommend! :thumbup:

The rest of the job went easily.

Image

No leaks so far. Opps, I just realized my F'd up cover is in the pic ^. How embarrassing. :oops:
Thanks for looking. beer1

_________________
Bklyn.X
ImageImage
"...burning commentary of bullshit masquerading as insight."


Top
 Profile  
 
 Post subject: Re: Bklyn.X
PostPosted: Thu Mar 30, 2023 12:24 pm 
Offline
Club Vice President
User avatar

Joined: Wed Oct 06, 2010 8:28 pm
Posts: 5428
Location: West Hartford, CT
The new cover looks great!


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Bklyn.X
PostPosted: Thu Mar 30, 2023 12:58 pm 
Offline
Supporting Member
User avatar

Joined: Tue Dec 20, 2011 7:47 pm
Posts: 680
Location: Enfield, CT
Man,that poor old cover...
Nothing ever goes easy does it.

Sent from my SM-G991U1 using Tapatalk


Top
 Profile  
 
 Post subject: Re: Bklyn.X
PostPosted: Tue Apr 04, 2023 7:23 pm 
Offline
Club President
User avatar

Joined: Mon Mar 31, 2008 10:54 am
Posts: 10046
Location: Brockton, MA
Quite the story, Tom! GLad it all worked out!

I've got one of those LubeLocker Gaskets on my rear diff. I've had no issues with it since I installed it with John 4(?) years ago.

_________________
Welcome Aboard the Black Pearl!


Top
 Profile  
 
 Post subject: Re: Bklyn.X
PostPosted: Wed Sep 13, 2023 10:06 am 
Offline
Global Moderator
User avatar

Joined: Sun Jan 15, 2006 1:18 pm
Posts: 11637
Location: Brooklyn, NY
So if want to waste some time with more of my shameless self promotion you can start by looking back in this thread a few years and you'll find a post about my bent control arms and the fix.
I still have not learned to drive so I'm thinking "more armor" rather education. beer1
I got a pair of Universal Tube Reinforcements from Ruff Stuff Specialties and my friend Dave stitch welded them on for me! :thumbup:

Image

Image

Image


I also added a "Hardhat" from Rock Hard 4X4 to my front diff.

Image
We'll see how they hold up to my abuse. :roll:

_________________
Bklyn.X
ImageImage
"...burning commentary of bullshit masquerading as insight."


Top
 Profile  
 
 Post subject: Re: Bklyn.X
PostPosted: Thu Sep 14, 2023 1:22 pm 
Offline
Club President
User avatar

Joined: Mon Mar 31, 2008 10:54 am
Posts: 10046
Location: Brockton, MA
Looking good, Tom!

_________________
Welcome Aboard the Black Pearl!


Top
 Profile  
 
 Post subject: Re: Bklyn.X
PostPosted: Sat Sep 30, 2023 10:46 am 
Offline
Global Moderator
User avatar

Joined: Sun Jan 15, 2006 1:18 pm
Posts: 11637
Location: Brooklyn, NY
Here's a few shots from last week at Rausch Creek in PA.

Image

Image

Image

_________________
Bklyn.X
ImageImage
"...burning commentary of bullshit masquerading as insight."


Top
 Profile  
 
 Post subject: Re: Bklyn.X
PostPosted: Thu May 09, 2024 2:21 pm 
Offline
Global Moderator
User avatar

Joined: Sun Jan 15, 2006 1:18 pm
Posts: 11637
Location: Brooklyn, NY
I can’t believe I rag on you folks to post up build threads and I haven’t been here since last year…shameful. :oops:

Anyways, here’s some more of my silliness for you:

I’ve added a Wolfbox G930 4K 10” Rear View Mirror Camera. It cost me $117 on amazon.

I’ve been looking for something like this for years. Ever since I put the spare on the rear and lifted the truck I can’t see shit out of my back window. I can parallel park without a rear view but have backed into trees off roading smacking the rear window out more than a few times. It’s become a joke with the “Safelite” guys; “haven’t I replaced this in the past?”.

I saw one in a Jeep on the trails at Rausch last year and started looking at the brand.
Then a couple of weeks ago while at AOAA with my friend Dennis I noticed he had one in his Tracker. Once he told me he liked it I ordered one and installed it last weekend.
Image

I mounted the camera over the license plate and the side of the plate light by drilling a couple of holes through the plate holder of my Shrockworks rear bumper then attaching with self-tapping screws.
Image

I need to make a few adjustments as far as programing (it took me a while to realize the rear image was reversed :shock: ) but that’s all minor crap that can be done easily on the “mirror” without taking it down or attaching it to anything.

I also need to get used to judging the distance (depth of field) but so far, I like it and for a bit over $100 wtf.

There are a bunch video's with how to's and unboxing so I'm not going to try and make another, just google Wolfbox G930

Hopefully I’ll save a rear window or two… beer1

In the meantime, here’s a glamour shot of Bklyn.X at AOAA last month:
Image

_________________
Bklyn.X
ImageImage
"...burning commentary of bullshit masquerading as insight."


Top
 Profile  
 
 Post subject: Re: Bklyn.X
PostPosted: Mon May 13, 2024 1:20 pm 
Offline
Club President
User avatar

Joined: Mon Mar 31, 2008 10:54 am
Posts: 10046
Location: Brockton, MA
Nice new mod, Tom.

1. Did the wire have enough slack to get to the back?
2. Do you have enough slack when swinging open the tire arm?

_________________
Welcome Aboard the Black Pearl!


Top
 Profile  
 
 Post subject: Re: Bklyn.X
PostPosted: Thu May 30, 2024 8:15 pm 
Offline
Forum User
User avatar

Joined: Tue Jul 17, 2007 3:41 pm
Posts: 1789
Location: Orwell, VT
Looking good, Tom!

_________________
-Bobby-

2010 Pathfinder - 2016 Maxima


Top
 Profile  
 
 Post subject: Re: Bklyn.X
PostPosted: Fri May 31, 2024 4:44 pm 
Offline
Global Moderator
User avatar

Joined: Sun Jan 15, 2006 1:18 pm
Posts: 11637
Location: Brooklyn, NY
BOBBY! :shock:

_________________
Bklyn.X
ImageImage
"...burning commentary of bullshit masquerading as insight."


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 221 posts ]  Go to page Previous  1 ... 11, 12, 13, 14, 15

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Theme designed by stylerbb.net & programy © 2008
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
[ Time : 0.321s | 15 Queries | GZIP : Off ]
All times are UTC - 5 hours