North East Xterra Club https://www.nexterra.org/forums/ |
|
Upgraded leaf pack bolt https://www.nexterra.org/forums/viewtopic.php?f=51&t=7761 |
Page 1 of 1 |
Author: | BKxterra718 [ Fri Jul 11, 2014 6:54 am ] |
Post subject: | Upgraded leaf pack bolt |
So when i was upgrading my shock-mount plates to skidderz I noticed one leaf pack bolt had been sheared off completely. So I went to Home Depot's and picked up a 3/16 "x 4" stainless grade 8 bolt w allen key receiver head. This way we dont have to rip it up w a vise grip and we can properly tighten the pack. Also got a flange nut for the bottoms. Only problem was aligning the leaves without takin the pack apart. Bent a couple good screwdrivers but in the end made it work w a punch set I picked up at harbor frieght. www.justinandersdenmark.com |
Author: | primerhb55 [ Fri Jul 11, 2014 12:28 pm ] |
Post subject: | Re: Upgraded leaf pack bolt |
Nice, that should hold up pretty well if not a little better than the regular center pins. Any fitment problems with the head of the bolt going into the axle or is it pretty much the same size? |
Author: | BKxterra718 [ Fri Jul 11, 2014 5:43 pm ] |
Post subject: | Re: Upgraded leaf pack bolt |
Like a glove man www.justinandersdenmark.com |
Author: | RomeoEJ [ Fri Jul 11, 2014 7:56 pm ] |
Post subject: | Re: Upgraded leaf pack bolt |
Nice work |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |