| North East Xterra Club https://www.nexterra.org/forums/ |
|
| New member in NH https://www.nexterra.org/forums/viewtopic.php?f=5&t=9894 |
Page 2 of 2 |
| Author: | Nismobeast [ Tue Mar 26, 2019 3:31 pm ] |
| Post subject: | Re: New member in NH |
I thought the camber bolts went into the LCA and not the UCA.  BostonX wrote: Take a sawsall to the UCA bolt. No joke. Just make sure you bought a replacement first! When installing the new UCAs, insert the bolt the other direction to make it easier to remove in the future. Some Nissan engineers were jerks...
|
|
| Author: | BKxterra718 [ Thu Mar 28, 2019 7:45 am ] |
| Post subject: | Re: New member in NH |
Nismobeast wrote: I thought the camber bolts went into the LCA and not the UCA. 1st Gen UCA BostonX wrote: Take a sawsall to the UCA bolt. No joke. Just make sure you bought a replacement first! When installing the new UCAs, insert the bolt the other direction to make it easier to remove in the future. Some Nissan engineers were jerks... 2nd Gen LCA And remove all sway bars, there is very little difference on road, and big difference off-road. It will take 1 minute to get used to. Sent from my SM-N950U using Tapatalk |
|
| Page 2 of 2 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|