North East Xterra Club https://www.nexterra.org/forums/ |
|
Crawlpedia https://www.nexterra.org/forums/viewtopic.php?f=45&t=7189 |
Page 1 of 1 |
Author: | BKxterra718 [ Tue Sep 10, 2013 7:34 am ] |
Post subject: | Crawlpedia |
http://www.crawlpedia.com/bolt_patterns.htm |
Author: | MtDewMike [ Tue Sep 10, 2013 8:26 am ] |
Post subject: | Re: Crawlpedia |
Nice find. |
Author: | Fiachra [ Tue Sep 10, 2013 8:55 am ] |
Post subject: | Re: Crawlpedia |
BKxterra718 wrote: http://www.crawlpedia.com/bolt_patterns.htm That's the ticket! Thanks man |
Author: | BKxterra718 [ Tue Sep 10, 2013 11:36 am ] |
Post subject: | Re: Crawlpedia |
idk bout the torque specs though i could swear for us first gens its 90 ft/lbs or so... |
Author: | Bklyn.X [ Tue Sep 10, 2013 12:15 pm ] |
Post subject: | Re: Crawlpedia |
BKxterra718 wrote: idk bout the torque specs though i could swear for us first gens its 90 ft/lbs or so... 87 - 108 ft-lb...just sayin... |
Author: | theplasticone [ Tue Sep 10, 2013 12:23 pm ] |
Post subject: | Re: Crawlpedia |
So apparently I've been overtorquing my lugs this whole time? I've been told the second gens are 98 ft-lbs but I know the lugs are M12... |
Author: | Fiachra [ Tue Sep 10, 2013 12:46 pm ] |
Post subject: | Re: Crawlpedia |
BKxterra718 wrote: idk bout the torque specs though i could swear for us first gens its 90 ft/lbs or so... From the 2004 Xterra FSM (MA-40) I set my wrench to 90# personally. |
Author: | Bklyn.X [ Tue Sep 10, 2013 1:33 pm ] |
Post subject: | Re: Crawlpedia |
Fiachra wrote: BKxterra718 wrote: idk bout the torque specs though i could swear for us first gens its 90 ft/lbs or so... From the 2004 Xterra FSM (MA-40) I set my wrench to 90# personally. Huh, that’s strange, the 2001 FSM (MA-39) says “87-108 ft-lb" I wonder why that is??? I set mine to 90# as well... |
Author: | Fiachra [ Tue Sep 10, 2013 1:48 pm ] |
Post subject: | Re: Crawlpedia |
Bklyn.X wrote: Fiachra wrote: BKxterra718 wrote: idk bout the torque specs though i could swear for us first gens its 90 ft/lbs or so... From the 2004 Xterra FSM (MA-40) I set my wrench to 90# personally. Huh, that’s strange, the 2001 FSM (MA-39) says “87-108 ft-lb" I wonder why that is??? I set mine to 90# as well... Because; your nuts can take more torqueage. WHOA! From the 2001 Xterra FSM (MA-39) Maybe my nuts are too tight... |
Author: | BKxterra718 [ Tue Sep 10, 2013 4:40 pm ] |
Post subject: | Re: Crawlpedia |
Maybe the range has to do with load size idk. |
Author: | Bklyn.X [ Tue Sep 10, 2013 5:37 pm ] |
Post subject: | Re: Crawlpedia |
BKxterra718 wrote: Maybe the range has to do with load size idk. The load? What you talkin bout? |
Author: | BKxterra718 [ Wed Sep 11, 2013 7:43 am ] |
Post subject: | Re: Crawlpedia |
like how its not a specific number. so maybe the torque is set according to weight idk wtf man, it says supporting member but im still a noob |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |