North East Xterra Club https://www.nexterra.org/forums/ |
|
Stupid question - Diff cover https://www.nexterra.org/forums/viewtopic.php?f=40&t=9954 |
Page 1 of 4 |
Author: | Bear [ Sun Jun 30, 2019 7:27 am ] |
Post subject: | Stupid question - Diff cover |
So I bought myself a gift for ECXC thanks to Angel and Dana at ruff stuff. Question about painting the bare steel, I know a few guys have these and wanted to know did you paint the inside or just the outside? I’m pretty sure it’s just the outside by figured I would ask. Thanks in advance and I have to say the cover is so beefy, just awesome. Bear Sent from my iPhone using Tapatalk |
Author: | Carpy [ Sun Jun 30, 2019 7:47 am ] |
Post subject: | Re: Stupid question - Diff cover |
Bear wrote: So I bought myself a gift for ECXC thanks to Angel and Dana at ruff stuff. Just the outside bud. I sprayed down all the metal with brakekleen and cleaned all the machine oil off. I used blue shop towels. I used a good vch primer filler, around 3 coats. Then vhc roll bar and chassis paint. I did use an acrylic red for the gorilla. But have since gone over it with black. Have fun with it. Be unique lolQuestion about painting the bare steel, I know a few guys have these and wanted to know did you paint the inside or just the outside? I’m pretty sure it’s just the outside by figured I would ask. Thanks in advance and I have to say the cover is so beefy, just awesome. Bear Sent from my iPhone using Tapatalk Sent from my VS990 using Tapatalk |
Author: | Bear [ Sun Jun 30, 2019 8:33 am ] |
Post subject: | Re: Stupid question - Diff cover |
Carpy wrote: Bear wrote: So I bought myself a gift for ECXC thanks to Angel and Dana at ruff stuff. Just the outside bud. I sprayed down all the metal with brakekleen and cleaned all the machine oil off. I used blue shop towels. I used a good vch primer filler, around 3 coats. Then vhc roll bar and chassis paint. I did use an acrylic red for the gorilla. But have since gone over it with black. Have fun with it. Be unique lolQuestion about painting the bare steel, I know a few guys have these and wanted to know did you paint the inside or just the outside? I’m pretty sure it’s just the outside by figured I would ask. Thanks in advance and I have to say the cover is so beefy, just awesome. Bear Sent from my iPhone using Tapatalk Sent from my VS990 using Tapatalk Thanks Nick I knew you had one thanks a million Sent from my iPhone using Tapatalk |
Author: | BostonX [ Sun Jun 30, 2019 11:22 am ] |
Post subject: | Re: Stupid question - Diff cover |
Mine is C200K from BF. Painted the outside only. Now to get around to installing the sucker..... How do I make sure my rtv gasket (no lube lock for c200) doesnt bleed into the cavity when torqued down? Sent from my LM-G710VM using Tapatalk |
Author: | JeffPro4x [ Sun Jun 30, 2019 3:24 pm ] |
Post subject: | Re: Stupid question - Diff cover |
BostonX wrote: Mine is C200K from BF. Painted the outside only. Now to get around to installing the sucker..... How do I make sure my rtv gasket (no lube lock for c200) doesnt bleed into the cavity when torqued down? Sent from my LM-G710VM using Tapatalk Follow the instructions on the rtv. It should tell you to apply and bead and let it sit for a specific amount of time before assembly. That is to let the rtv cure a bit and form the gasket |
Author: | Bear [ Thu Jul 11, 2019 10:30 am ] |
Post subject: | Re: Stupid question - Diff cover |
Looking pretty slick I must say! Ready to install Saturday! Sent from my iPad using Tapatalk |
Author: | Carpy [ Thu Jul 11, 2019 11:02 am ] |
Post subject: | Re: Stupid question - Diff cover |
Bear wrote: Looking pretty slick I must say! Ready to install Saturday! Nice man, great job!Sent from my iPad using Tapatalk Sent from my VS988 using Tapatalk |
Author: | Carpy [ Thu Jul 11, 2019 11:05 am ] |
Post subject: | Re: Stupid question - Diff cover |
Its always nice when they are fresh. Sent from my VS988 using Tapatalk |
Author: | Bear [ Thu Jul 11, 2019 11:24 am ] |
Post subject: | Re: Stupid question - Diff cover |
Carpy wrote: Its always nice when they are fresh. Sent from my VS988 using Tapatalk Looks Great Nick love the red and black! Sent from my iPad using Tapatalk |
Author: | Carpy [ Thu Jul 11, 2019 11:56 am ] |
Post subject: | Re: Stupid question - Diff cover |
Bear wrote: Looking pretty slick I must say! Ready to install Saturday! I used a little of the little blue permenex tube to seal the fill plug, because it didnt seal real good. Just a heads up to keep an eye on it.Sent from my iPad using Tapatalk Sent from my VS988 using Tapatalk |
Author: | MtDewMike [ Thu Jul 11, 2019 11:58 am ] |
Post subject: | Re: Stupid question - Diff cover |
Both paint jobs look good, guys. |
Author: | Carpy [ Thu Jul 11, 2019 12:42 pm ] |
Post subject: | Re: Stupid question - Diff cover |
MtDewMike wrote: Both paint jobs look good, guys. Did mine after the last B2SRSent from my VS988 using Tapatalk |
Author: | Bklyn.X [ Thu Jul 11, 2019 1:34 pm ] |
Post subject: | Re: Stupid question - Diff cover |
I paint mine a couple times a year... |
Author: | Bass4Runner [ Thu Jul 11, 2019 10:10 pm ] |
Post subject: | Re: Stupid question - Diff cover |
Nice jobs guys !! you too Tom...lol |
Author: | Bear [ Sat Jul 13, 2019 8:09 am ] |
Post subject: | Re: Stupid question - Diff cover |
Anybody have issues with hardware on this cover! I can’t seem to get the bolts in, like the hole don’t all line up? AAaarrrrrgh! Wtf Sent from my iPhone using Tapatalk |
Page 1 of 4 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |