North East Xterra Club
https://www.nexterra.org/forums/

Updates on my 02 xterra
https://www.nexterra.org/forums/viewtopic.php?f=39&t=9473		 Page 1 of 1
Author:  TS_UML [ Sun Dec 03, 2017 6:14 pm ]
Post subject:  Updates on my 02 xterra
Western mass checking in recent updates include
-warn manual locking hubs.
-bilstein 4600 struts in front.
-ski racks back on for winter.
-something special from nisstec and ppe engineering.(ordered today)
ImageImageImageImageImageImage

Sent from my 0PJA2 using Tapatalk
Author:  Rusty [ Mon Dec 04, 2017 9:43 am ]
Post subject:  Re: Updates on my 02 xterra
TS_UML wrote:
Western mass checking in recent updates include
-warn manual locking hubs.
-bilstein 4600 struts in front.
-ski racks back on for winter.
-something special from nisstec and ppe engineering.(ordered today)
ImageImageImageImageImageImage

Sent from my 0PJA2 using Tapatalk
Hey i know you! Haha, looks real good man keep on modding

Sent from my SM-J727T using Tapatalk
Author:  TS_UML [ Mon Dec 04, 2017 9:58 am ]
Post subject:  Re: Updates on my 02 xterra
Rusty wrote:
TS_UML wrote:
Western mass checking in recent updates include
-warn manual locking hubs.
-bilstein 4600 struts in front.
-ski racks back on for winter.
-something special from nisstec and ppe engineering.(ordered today)
ImageImageImageImageImageImage

Sent from my 0PJA2 using Tapatalk
Hey i know you! Haha, looks real good man keep on modding

Sent from my SM-J727T using Tapatalk
The app definitely makes it easier to post so hopefully I'll be able to be more involved. Especially with having two xterras at the house.Image

Sent from my 0PJA2 using Tapatalk
Author:  TS_UML [ Wed Dec 13, 2017 10:27 pm ]
Post subject:  Re: Updates on my 02 xterra
Light bracket is on just waiting on my new lights to come from Amazon.Image

Sent from my 0PJA2 using Tapatalk
Author:  DirtySocks [ Thu Dec 14, 2017 10:53 am ]
Post subject:  Re: Updates on my 02 xterra



Sent from my iPhone using Tapatalk
Author:  SandSquid [ Thu Dec 28, 2017 3:29 pm ]
Post subject:  Re: Updates on my 02 xterra
TS_UML wrote:
Light bracket is on


P&P Engineering's "light cage"?
Author:  TS_UML [ Thu Dec 28, 2017 3:33 pm ]
Post subject:  Re: Updates on my 02 xterra
SandSquid wrote:
TS_UML wrote:
Light bracket is on


P&P Engineering's "light cage"?
Correct. It's very well made and worth the money so far very impressed and there's no additional wind noise without the lights. Haven't wired up lights yet with the lack of a heated garage and it being 9 degrees outside as the high. Did get hella 500 so once it warms a little I'll wire them up


Sent from my 0PJA2 using Tapatalk
Author:  SandSquid [ Thu Dec 28, 2017 4:30 pm ]
Post subject:  Re: Updates on my 02 xterra
TS_UML wrote:
SandSquid wrote:
TS_UML wrote:
Light bracket is on


P&P Engineering's "light cage"?
Correct. It's very well made and worth the money so far very impressed and there's no additional wind noise without the lights.


I've been ogling photo's of light bars, this one is tops on my wish list... IF they will get it back-dated to fit a Gen.1, after my bank account recovers from a 200k mile laundry list of repairs and preventive maintenance.
Author:  TS_UML [ Thu Dec 28, 2017 4:33 pm ]
Post subject:  Re: Updates on my 02 xterra
SandSquid wrote:
TS_UML wrote:
SandSquid wrote:
[quote="TS_UML"]Light bracket is on


P&P Engineering's "light cage"?
Correct. It's very well made and worth the money so far very impressed and there's no additional wind noise without the lights.


I've been ogling photo's of light bars, this one is tops on my wish list... IF they will get it back-dated to fit a Gen.1, after my bank account recovers from a 200k mile laundry list of repairs and preventive maintenance.[/quote]It does i got it from nisstec 225$ with free shipping. Fits both my dads gen 1 and my 1.5


Sent from my 0PJA2 using Tapatalk
Author:  SandSquid [ Thu Dec 28, 2017 8:01 pm ]
Post subject:  Re: Updates on my 02 xterra
TS_UML wrote:
Fits both my dads gen 1 and my 1.5


Well, that just pushed me over the top, Thanks.... Now to scrounge up some cha-ching
Author:  TS_UML [ Thu Dec 28, 2017 8:03 pm ]
Post subject:  Re: Updates on my 02 xterra
SandSquid wrote:
TS_UML wrote:
Fits both my dads gen 1 and my 1.5


Well, that just pushed me over the top, Thanks.... Now to scrounge up some cha-ching
It has slots instead of holes so it can work with both


Sent from my 0PJA2 using Tapatalk
Author:  TS_UML [ Sun Jan 28, 2018 3:29 pm ]
Post subject:  Re: Updates on my 02 xterra
TS_UML wrote:
SandSquid wrote:
TS_UML wrote:
Fits both my dads gen 1 and my 1.5


Well, that just pushed me over the top, Thanks.... Now to scrounge up some cha-ching
It has slots instead of holes so it can work with both


Sent from my 0PJA2 using Tapatalk
The hella 500s are on and wired. Can't wait to use them on a trail. ImageImageImageImageImage

Sent from my 0PJA2 using Tapatalk
Author:  Bass4Runner [ Sun Jan 28, 2018 7:34 pm ]
Post subject:  Re: Updates on my 02 xterra
looking great man !!
Author:  Bklyn.X [ Sun Jan 28, 2018 11:00 pm ]
Post subject:  Re: Updates on my 02 xterra
Nice. Any details on your wiring job?
Author:  TS_UML [ Sun Jan 28, 2018 11:09 pm ]
Post subject:  Re: Updates on my 02 xterra
Bklyn.X wrote:
Nice. Any details on your wiring job?
I used a rugged ridge wiring harness. That was the same as my 100 watt lights. The power wire is run up the drivers side door seam behind the door seal and the ground is run to the drivers side fender behind the door seal because I couldn't get a decent ground on the rack. I do intend to find some easy to remove clips to add in for the purposes of cleaning under the fairing but haven't found exactly what I'm looking for yet.


Sent from my 0PJA2 using Tapatalk
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/