North East Xterra Club https://www.nexterra.org/forums/ |
|
Help! My heater nobe switch isn't working https://www.nexterra.org/forums/viewtopic.php?f=39&t=8945 |
Page 1 of 1 |
Author: | Dirtygreenxterra [ Tue May 17, 2016 3:35 pm ] |
Post subject: | Help! My heater nobe switch isn't working |
Somebody please help to why the switch/nobe won't turn. In the video you'll see me try and actual use force. It was just working the other night. Any advice? Sent from my iPhone using Tapatalk |
Author: | BKxterra718 [ Tue May 17, 2016 5:38 pm ] |
Post subject: | Help! My heater nobe switch isn't working |
Remove center console w phillips #2 and plastic interior trim tool, might have to remove gauge cluster border as well. Sounds like either plastic gear is jammed or cable came out and it jammed. Once assembly is removed there is a cable in the rear thats held in by a clip be very careful its all fragile. Cable could also have came out and got jammed. Was it tough to turn in certain positions before it became like this? |
Author: | Dirtygreenxterra [ Wed May 18, 2016 6:40 am ] |
Post subject: | Re: Help! My heater nobe switch isn't working |
BKxterra718 wrote: Remove center console w phillips #2 and plastic interior trim tool, might have to remove gauge cluster border as well. Sounds like either plastic gear is jammed or cable came out and it jammed. Once assembly is removed there is a cable in the rear thats held in by a clip be very careful its all fragile. Cable could also have came out and got jammed. Was it tough to turn in certain positions before it became like this? It was working like normal until I got in the car yesterday morning. I'm going to take the center out and look around. I'll get back to you if I can't figure what's going on or I figure it out |
Author: | Dirtygreenxterra [ Fri May 20, 2016 8:28 am ] |
Post subject: | Re: Help! My heater nobe switch isn't working |
BKxterra718 wrote: Remove center console w phillips #2 and plastic interior trim tool, might have to remove gauge cluster border as well. Sounds like either plastic gear is jammed or cable came out and it jammed. Once assembly is removed there is a cable in the rear thats held in by a clip be very careful its all fragile. Cable could also have came out and got jammed. Was it tough to turn in certain positions before it became like this? so I tried taking the center consul out and can't figure it out. I pulled all the clips our and took all the screws out. Also I think something fell inside the defroster by the window cause I remember having something up there and now can't find it. Would that cause it not to turn?
|
Author: | leo [ Mon May 23, 2016 4:49 pm ] |
Post subject: | Re: Help! My heater nobe switch isn't working |
You gonna have to take it center consul out bro is not had men Sent from my iPhone using Tapatalk |
Author: | Fiachra [ Tue May 24, 2016 6:50 am ] |
Post subject: | Re: Help! My heater nobe switch isn't working |
What year is this truck again? Sent from my iPad using Tapatalk |
Author: | Fiachra [ Tue May 24, 2016 6:56 am ] |
Post subject: | Re: Help! My heater nobe switch isn't working |
I think I have some instruction sheet in the archives. (How to remove the console to install a stereo) I'll look this evening and if I do I'll scan and post it up here. Sent from my iPad using Tapatalk |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |