Help need to find driveshaft angle kit

dansterra · **Posted:** Wed May 06, 2015 8:58 am

Hey all so my new build is going great for those who dont know my 07 got taken out on 95s by a 200lb buck in November anyway after lifting my 2012 pro4x i now have a shaft rumble from 30 to 35 mph my dealership said to get s angle kit for my driveshaft now i haven't heard of this i know prg makes a new shaft for this reason but not looking to change the shaft if i dont have to anybody have thoughts

mixxali4 · **Posted:** Wed May 06, 2015 9:18 am

Check universal

dansterra · **Posted:** Wed May 06, 2015 9:22 am

Universal and cv check out fine its the angle my lift created that is causing the vibration

c3PO · **Joined:** Thu Feb 28, 2013 1:08 pm **Posts:** 388

Whats your rear lift?

Did you use shims?

I have 2" AAL and 2" lift shackles and used 3deg shims. No vibes.

dansterra · **Posted:** Wed May 06, 2015 9:46 am

No shims rear has shackles and add a leafs and front is a 2 inch spacer with another inch from bilstein 5100 adjustables its weird my 07 had a more aggressive lift no problems i went for top dollar stuff on this one and viola its vibrating

MtDewMike · **Posted:** Wed May 06, 2015 10:11 am

c3PO wrote:

I have 2" AAL and 2" lift shackles and used 3deg shims. No vibes.

Similar to Phong, I have a 2" Alcan leaf pack and adjustable PRG shackles, with 3 degree shims. No noticeable vibrations.

c3PO · **Joined:** Thu Feb 28, 2013 1:08 pm **Posts:** 388

dansterra wrote:

No shims rear has shackles and add a leafs and front is a 2 inch spacer with another inch from bilstein 5100 adjustables its weird my 07 had a more aggressive lift no problems i went for top dollar stuff on this one and viola its vibrating

Youre 2012 probably has more arch in the rear leafs than your 07.

A 3 or 4deg shim is a good fix for you, it shiuld come with a new center pin. But also get new u bolts.

Try this, weigh the back of your Xterra down with a 300-500lbs of people or gear. The vibes will probably go away. Then youll know if you need them.

dansterra · **Posted:** Wed May 06, 2015 11:10 am

Where have you been getting your parts especially the prg stuff

c3PO · **Joined:** Thu Feb 28, 2013 1:08 pm **Posts:** 388

I get them directly from the PRG webiste.

http://Www.prgproducts.com

But Nisstec or 4x4parts is fine too.

dansterra · **Posted:** Wed May 06, 2015 1:37 pm

Awesome thank you i know im not causing the truck harm but it would nice to smooth it back out

Help need to find driveshaft angle kit

Who is online