North East Xterra Club https://www.nexterra.org/forums/ |
|
Prg shackle question. https://www.nexterra.org/forums/viewtopic.php?f=22&t=9736 |
Page 1 of 1 |
Author: | Carpy [ Sat Sep 29, 2018 5:01 pm ] |
Post subject: | Prg shackle question. |
I just ordered front and rear bilstien 5100s I want to order the prg adjustable shackels but I'm concerned if I can reuse the leaf bushings. What is recomended for bushings with the prg shackels considering they don't come with them? Sent from my VS990 using Tapatalk |
Author: | murphy [ Sat Sep 29, 2018 6:58 pm ] |
Post subject: | Re: Prg shackle question. |
Oem shacle bushings are something like $25 from Nissan. It’s your call, but I would do them. Cheap insurance, and you know it’s all new. The worst part for me would be if I had it apart before I knew I need them. |
Author: | Carpy [ Sat Sep 29, 2018 6:59 pm ] |
Post subject: | Re: Prg shackle question. |
murphy wrote: Oem shacle bushings are something like $25 from Nissan. It’s your call, but I would do them. Cheap insurance, and you know it’s all new. The worst part for me would be if I had it apart before I knew I need them. Thanks man. Will do.Sent from my VS990 using Tapatalk |
Author: | Carpy [ Sat Sep 29, 2018 7:25 pm ] |
Post subject: | Re: Prg shackle question. |
masshole413 wrote: murphy wrote: Oem shacle bushings are something like $25 from Nissan. It’s your call, but I would do them. Cheap insurance, and you know it’s all new. The worst part for me would be if I had it apart before I knew I need them. Thanks man. Will do.Sent from my VS990 using Tapatalk Sent from my VS990 using Tapatalk |
Author: | Carpy [ Sat Sep 29, 2018 10:31 pm ] |
Post subject: | Re: Prg shackle question. |
masshole413 wrote: masshole413 wrote: murphy wrote: Oem shacle bushings are something like $25 from Nissan. It’s your call, but I would do them. Cheap insurance, and you know it’s all new. The worst part for me would be if I had it apart before I knew I need them. Thanks man. Will do.Sent from my VS990 using Tapatalk Sent from my VS990 using Tapatalk Sent from my VS990 using Tapatalk |
Author: | murphy [ Sun Sep 30, 2018 7:22 am ] |
Post subject: | Re: Prg shackle question. |
I have the Nisstec version. They worked with the oem bushings. I have some OEM shackles at the house. I could measure the stud size, and you could compare that measurement with the PRG bolt size. Actually, I have some OEM bushings at the house too, that I could measure. Then you won’t need to take yours apart to find out. |
Author: | JeffPro4x [ Sun Sep 30, 2018 11:43 am ] |
Post subject: | Re: Prg shackle question. |
I used the prg shackles with oem bushings. Fit just fine. Sent from my Pixel 2 XL using Tapatalk |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |