I picked up a second gen Gobi posted here and contacted them. They confirmed the rack itself is the same for both gens, I could buy the first gen supports and hardware for $500. Nope. I drilled holes in the plates to use the factory nutzerts, and where I couldn't, I made holes and reinforced the inside. A previous owner welded the light bar tabs onto the front supports. I ran the light bar and chase light wiring through the roof. The Gobi Hi-Lift and awning brackets were over $100 each so I used Nilights brackets for the awning and put plates between the Hi-Lift tubular mount. Pleased with how it turned out, my overlander cred is waaay up! Thanks @westracing01
Sent from my SM-F936U using Tapatalk