North East Xterra Club https://www.nexterra.org/forums/ |
|
Frankin swap https://www.nexterra.org/forums/viewtopic.php?f=18&t=10415 |
Page 1 of 2 |
Author: | TKX [ Fri Oct 28, 2022 2:41 pm ] |
Post subject: | Frankin swap |
Got 1 side done today...waiting on new coilovers so just using my radflos for now...fairly painless liberal use of anti seize in the past is paying off... Thanks to all again..now hurry nisstec with my ts mkii's... Oh...and rockauto is great for shipping quick and getting stuff in 2 days...but was missing balljoints for my ucs's... Sent from my SM-G991U1 using Tapatalk |
Author: | jac04 [ Mon Oct 31, 2022 6:42 am ] |
Post subject: | Re: Frankin swap |
Nice. Any thoughts for what to do about fender flares / tire coverage? |
Author: | TKX [ Mon Oct 31, 2022 8:00 am ] |
Post subject: | Re: Frankin swap |
I'm not entirely sure yet but some type of flexible liner. My inspection is good until July so I've got time to figure it out thankfully. Sent from my SM-G991U1 using Tapatalk |
Author: | MainerX [ Wed Nov 16, 2022 9:51 am ] |
Post subject: | Re: Frankin swap |
When did you move to MA? Husky Liners makes "Long John Mud Flaps." I've actually debated running these on my X. https://www.huskyliners.com/Long-John-Mud-Flaps |
Author: | TKX [ Wed Nov 16, 2022 10:49 am ] |
Post subject: | Re: Frankin swap |
MainerX wrote: When did you move to MA? Hey man..Husky Liners makes "Long John Mud Flaps." I've actually debated running these on my X. https://www.huskyliners.com/Long-John-Mud-Flaps Moved back to MA about 5 years ago now.. I'm going to look into those more, may work out perfectly. Sent from my SM-G991U1 using Tapatalk |
Author: | TKX [ Thu Nov 17, 2022 5:40 pm ] |
Post subject: | Re: Frankin swap |
Got my alignment done,just waiting on new coilovers to swap in. Using the new nisstec mkii's. The spring is a bit higher at 650 but should be ok. Drives pretty good I'll have to say right now just using the worn out rad flos., I put new hubs in while I had it apart too . I was getting a humming from 1 of them so that helped . Oh..put 2 inch spacers in the back too. They don't match the front perfectly but close. Sent from my SM-G991U1 using Tapatalk |
Author: | MtDewMike [ Fri Nov 18, 2022 3:01 pm ] |
Post subject: | Re: Frankin swap |
Looks good, Tony! |
Author: | murphy [ Sat Nov 19, 2022 11:20 am ] |
Post subject: | Re: Frankin swap |
I’ve used the ‘long Johns’ and they helped me pass inspection in mass. |
Author: | TKX [ Wed Jan 18, 2023 11:44 am ] |
Post subject: | Re: Frankin swap |
Finally got these bad boys in yesterday. Hopefully going in soon if the weather cooperates. Sent from my SM-G991U1 using Tapatalk |
Author: | jac04 [ Thu Jan 19, 2023 12:35 pm ] |
Post subject: | Re: Frankin swap |
Those sure are pretty. |
Author: | TKX [ Thu Jan 19, 2023 9:04 pm ] |
Post subject: | Re: Frankin swap |
jac04 wrote: Those sure are pretty. Got them installed before the rain..very big improvement. Mostly I think because they are new and a little heavier spring.Sent from my SM-T580 using Tapatalk |
Author: | JeffNJM3 [ Thu Jan 26, 2023 2:58 pm ] |
Post subject: | Re: Frankin swap |
Wow those look nice! Glad to see you got it all back together |
Author: | TKX [ Thu Jan 26, 2023 7:46 pm ] |
Post subject: | Re: Frankin swap |
JeffNJM3 wrote: Wow those look nice! Glad to see you got it all back together Thanks man. Ride is good on road, it all needs a good shakedown run.Sent from my SM-G991U1 using Tapatalk |
Author: | MtDewMike [ Fri Jan 27, 2023 10:59 am ] |
Post subject: | Re: Frankin swap |
Tony, are those designed and manufactured by Nisstec or did they have a third-party make them? What's the spring rate? |
Author: | TKX [ Fri Jan 27, 2023 11:09 am ] |
Post subject: | Re: Frankin swap |
MtDewMike wrote: Tony, are those designed and manufactured by Nisstec or did they have a third-party make them? What's the spring rate? Hi Mike. 3rd party. Not sure from where but out of the country. 650 springs for titan swap are the only option. Seems to ride good, a little stiff. Sent from my SM-G991U1 using Tapatalk |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |