This is a set of Radflo 2.0 OEM length (I believe) coilovers, with 650 lb springs. These definitely need some TLC.
I've spoken with Glenn at Radflo and he said they can be rebuilt. Parts that need to be replaced are:
- One (1) of the shocks definitely needs a new end cap with bearings (bottom one in the pic below - if it was me, I'd replace the end caps on both shocks)
- One (1) new set of bearings for "good" end cap for the other shock (if you don't replace the end caps on both shocks)
- Two (2) new sets of bearings at top metal plates
- Service both shocks
The top metal plates could use some sandblasting and a good coat of paint.
I am the second owner of these shocks. XterraVT was the first owner. He had 750 coils on them originally; when I took ownership, I had new 650 coils installed. I ran these shocks for no more than 3 years. They served me well. I ended up upgrading to the 2.5's.
I can provide more pics if needed.
I'm asking $150. They are located in zip code 02333. If you need them shipped, I'll get the pricing for you.