It is currently Thu Mar 28, 2024 12:00 pm




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Saturday March 12
PostPosted: Sun Mar 06, 2016 11:18 pm 
Offline
Forum User
User avatar

Joined: Wed Feb 17, 2010 11:49 am
Posts: 1139
Location: Lancaster,Pa
Cochranvill, Pa. Body lift and titan suspension swap. Heated garage included. Come on out and bust some knuckles with me, it will be fun!

Sent from my SM-N900V using Tapatalk

_________________
2008 OR 4X4 6MT
2005 s 4x4 6 speed R.I.P. 6-23-2010


Top
 Profile  
 
 Post subject: Re: Saturday March 12
PostPosted: Mon Mar 07, 2016 9:42 am 
Offline
Supporting Member
User avatar

Joined: Thu Sep 06, 2012 3:54 pm
Posts: 2207
Location: Brooklyn, NY
Haha nice! Im doin my BL the same day!

_________________
www.JustinAndersDenmark.com

Image


Top
 Profile  
 
 Post subject: Re: Saturday March 12
PostPosted: Mon Mar 07, 2016 1:24 pm 
Offline
Forum User
User avatar

Joined: Thu Feb 28, 2013 1:08 pm
Posts: 388
Sounds fun but you're too far and Im out of town.

Have plenty of blades to remove the LCAs and a puller to seperate the lower ball joint.

Good luck.


Top
 Profile  
 
 Post subject: Re: Saturday March 12
PostPosted: Mon Mar 07, 2016 1:48 pm 
Offline
Supporting Member
User avatar

Joined: Tue Dec 20, 2011 7:47 pm
Posts: 679
Location: Enfield, CT
Tom, what are you doing up front? M205 or staying locked r180?

Sent from my SM-G920V using Tapatalk


Top
 Profile  
 
 Post subject: Re: Saturday March 12
PostPosted: Tue Mar 15, 2016 10:36 pm 
Offline
Forum User
User avatar

Joined: Wed Feb 17, 2010 11:49 am
Posts: 1139
Location: Lancaster,Pa
Locked r180, got a spare extended axle for when I need one.

Didn't get to the suspension, broke a body mount bolt and a rear bumper mount bolt. Got the body lift done around 2 then helped Stephen Q finish installing the lift on his dads frontier. Didnt get done till 10pm, long day.

_________________
2008 OR 4X4 6MT
2005 s 4x4 6 speed R.I.P. 6-23-2010


Top
 Profile  
 
 Post subject: Re: Saturday March 12
PostPosted: Tue Mar 15, 2016 10:38 pm 
Offline
Forum User
User avatar

Joined: Wed Feb 17, 2010 11:49 am
Posts: 1139
Location: Lancaster,Pa
c3PO wrote:
Sounds fun but you're too far and Im out of town.

Have plenty of blades to remove the LCAs and a puller to seperate the lower ball joint.

Good luck.


I put camber bolts in and check them on occasion to make sure they are still free so no worries there. Have puller ready to go.

_________________
2008 OR 4X4 6MT
2005 s 4x4 6 speed R.I.P. 6-23-2010


Top
 Profile  
 
 Post subject: Saturday March 12
PostPosted: Wed Mar 16, 2016 10:05 am 
Offline
Supporting Member
User avatar

Joined: Thu Sep 06, 2012 3:54 pm
Posts: 2207
Location: Brooklyn, NY
TomsRedX wrote:
Locked r180, got a spare extended axle for when I need one.

Didn't get to the suspension, broke a body mount bolt and a rear bumper mount bolt. Got the body lift done around 2 then helped Stephen Q finish installing the lift on his dads frontier. Didnt get done till 10pm, long day.


Glad u got it done despite the bolt. I was sprayin my rig for 3 weeks before the lift. Long day, def hear that. Me and my girl didnt finish the 2"BL on the fronty till midnight. Took me 10hrs. Ran into several complications. Steering shaft wouldnt retighten, radiator drain plug broke had to extract and replace, and rear bumper bolts all seized. Couldnt fig out the lift for the bed. A/C's instructions are crap. I cut off a mount bolt i needed, wound up punchin it out w an air hammer and just usin a 3/8 bolt it holds better than the Nissan factory one. Anyways if anyones wonderin on a frontier crew cab the 2x2x4 brackets go on the cab side of the bed and the 2" pucks go on the rear. The rubber washers go between the pucks/brackets and the frame. I had to find out the hard way. And yes 10hrs, i did it with love and care for each nook and cranny.

_________________
www.JustinAndersDenmark.com

Image


Top
 Profile  
 
 Post subject: Re: Saturday March 12
PostPosted: Wed Mar 16, 2016 10:27 am 
Offline
Forum User
User avatar

Joined: Wed Feb 17, 2010 11:49 am
Posts: 1139
Location: Lancaster,Pa
My lift didn't come with any instructions or relocation brackets so had to do some fab work. There's a good how too that I somewhat followed.

Sent from my SM-N900V using Tapatalk

_________________
2008 OR 4X4 6MT
2005 s 4x4 6 speed R.I.P. 6-23-2010


Top
 Profile  
 
 Post subject: Re: Saturday March 12
PostPosted: Wed Mar 16, 2016 12:08 pm 
Offline
Club President
User avatar

Joined: Mon Mar 31, 2008 10:54 am
Posts: 9987
Location: Brockton, MA
TomsRedX wrote:
My lift didn't come with any instructions or relocation brackets so had to do some fab work. There's a good how too that I somewhat followed.

Sent from my SM-N900V using Tapatalk

Where did you get your BL from, Tom? Mine came from Brian @ Cherry Hill, and he provided instructions.

_________________
Welcome Aboard the Black Pearl!


Top
 Profile  
 
 Post subject: Re: Saturday March 12
PostPosted: Wed Mar 16, 2016 11:08 pm 
Offline
Forum User
User avatar

Joined: Wed Feb 17, 2010 11:49 am
Posts: 1139
Location: Lancaster,Pa
Came from NISSTEC, won it in the raffle at WENT. Came with the pucks, zipties and upper radiator hose. Had to cut the hose to make it fit right.

_________________
2008 OR 4X4 6MT
2005 s 4x4 6 speed R.I.P. 6-23-2010


Top
 Profile  
 
 Post subject: Re: Saturday March 12
PostPosted: Thu Mar 17, 2016 11:13 am 
Offline
Club President
User avatar

Joined: Mon Mar 31, 2008 10:54 am
Posts: 9987
Location: Brockton, MA
Yeah, we had to trim the radiator hose a bit that came with the Cherry Hill kit, too.

_________________
Welcome Aboard the Black Pearl!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Theme designed by stylerbb.net & programy © 2008
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
[ Time : 0.302s | 13 Queries | GZIP : Off ]
All times are UTC - 5 hours