Titan swap 2 Sunday

leo · **Posted:** Sun Jul 26, 2015 4:02 pm

I got PRG upper control arm and suspension brake line this is my 2 sunday working on my truck

Tgis how it look after the suspension and control arms

For bow that all i did i have to change the diff m205 and out axel i have m226 to intall to :-)

Sent from my SM-G860P using Tapatalk

c3PO · **Joined:** Thu Feb 28, 2013 1:08 pm **Posts:** 388

Looks awesome Leo.

leo · **Posted:** Mon Jul 27, 2015 8:26 am

Slowly is geting done :-)

next is m205 and axels and the m226 :-)

Sent from my SM-G860P using Tapatalk

MtDewMike · **Posted:** Mon Jul 27, 2015 9:14 am

It's not fully Titan swapped yet, correct? How come the front end has the wider stance, then?

leo · **Posted:** Mon Jul 27, 2015 9:18 am

It is titan swapped i just need to install the front diff i have it at home

Sent from my SM-G860P using Tapatalk

Yellow07s · **Posted:** Mon Jul 27, 2015 9:20 am

MtDewMike wrote:

It's not fully Titan swapped yet, correct? How come the front end has the wider stance, then?

Titan swapped usually is just the front suspension and diff, very few people go as far as actually doing the rear axle. The front is 3 inches wider on each side than the rear is, a spacer on the rear and you get closer.

leo · **Posted:** Mon Jul 27, 2015 9:23 am

Yes i got the rear axel because i got it for 800 and it have looker m226 :-)

Sent from my SM-G860P using Tapatalk

Yellow07s · **Posted:** Mon Jul 27, 2015 9:40 am

leo wrote:

Yes i got the rear axel because i got it for 800 and it have looker m226 :-)

Sent from my SM-G860P using Tapatalk

Even cooler...hopefully it bolts up without much issue.

leo · **Posted:** Mon Jul 27, 2015 9:42 am

Yellow07s wrote:

leo wrote:

Yes i got the rear axel because i got it for 800 and it have looker m226 :-)

Sent from my SM-G860P using Tapatalk

Even cooler...hopefully it bolts up without much issue.

I hope not bro will see i have to look for the wiring for the locker

Sent from my SM-G860P using Tapatalk

MtDewMike · **Posted:** Mon Jul 27, 2015 10:17 am

But from my understanding of this thread, Leo hasn't done the CV shafts yet, correct? It looks like he's done the Titan UCA's and LCA's; is that what's currently pushing out the front wheels?

leo · **Posted:** Mon Jul 27, 2015 10:22 am

MtDewMike wrote:

But from my understanding of this threrad, Leo hasn't done the CV shafts yet, correct? It looks like he's done the Titan UCA's and LCA's; is that what's currently pushing out the front wheels?

Yes only did titan UCAS AND LCAS
This weekend im gonna remove my front diff and out the M205 and axels so my front is gonna be done

Sent from my SM-G860P using Tapatalk

MtDewMike · **Posted:** Mon Jul 27, 2015 10:23 am

So, you have the stock CV shafts in there right now? Aren't they too short for the longer arms?

leo · **Posted:** Mon Jul 27, 2015 10:34 am

MtDewMike wrote:

So, you have the stock CV shafts in there right now? Aren't they too short for the longer arms?

I dont have then i took them off bro :-)

is nothing there

Sent from my SM-G860P using Tapatalk

MtDewMike · **Posted:** Mon Jul 27, 2015 1:38 pm

leo wrote:

MtDewMike wrote:

So, you have the stock CV shafts in there right now? Aren't they too short for the longer arms?

I dont have then i took them off bro :-)

is nothing there

Sent from my SM-G860P using Tapatalk

AH, OK. You're just running in 2WD for now. Gotcha.

leo · **Posted:** Mon Jul 27, 2015 1:48 pm

MtDewMike wrote:

leo wrote:

MtDewMike wrote:

So, you have the stock CV shafts in there right now? Aren't they too short for the longer arms?

I dont have then i took them off bro :-)

is nothing there

Sent from my SM-G860P using Tapatalk

AH, OK. You're just running in 2WD for now. Gotcha.

Yeah just for now :-)

i love how it drive now

Sent from my SM-G860P using Tapatalk

Titan swap 2 Sunday

Who is online