3" suspension lift assistance

ThorX · **Posted:** Thu Feb 19, 2015 1:27 pm

Anyone in the Northeast PA area like to assist with installing a suspension lift? I will travel to your location. I'm located Just outside of Hazleton, PA.

mixxali4 · **Posted:** Thu Feb 19, 2015 2:00 pm

1st gen or 2nd .....doesn't matter come to Brooklyn we hook u up.... :cheers:

BKxterra718 · **Posted:** Thu Feb 19, 2015 2:49 pm

Hmmm, Hazelton got that Harry's you pull it yard tho... Leme call and see how many Xterra's they got on the lott.

mixxali4 · **Posted:** Thu Feb 19, 2015 2:54 pm

We can cut besf short and do it

ThorX · **Posted:** Thu Feb 19, 2015 3:02 pm

My apologies, it is a 2nd gen. Never been to Brooklyn before

ThorX · **Posted:** Thu Feb 19, 2015 3:07 pm

I would say no X's at Harry's. I yet to see one there. Checked a few times

mixxali4 · **Posted:** Thu Feb 19, 2015 3:20 pm

ThorX wrote:

I would say no X's at Harry's. I yet to see one there. Checked a few times

We took one apart b 4.....so if u never been to Brooklyn then its on

ThorX · **Posted:** Thu Feb 19, 2015 3:46 pm

Sometime next weekend possible?

LizardKing · **Joined:** Mon Jul 18, 2011 6:07 am **Posts:** 332

Umm... You got somewhere warm? or at least dry?

I would be happy to do it if we had a dry spot. My driveway looks like an ice palace tho.

ThorX · **Posted:** Thu Feb 19, 2015 7:08 pm

I wish I did, my driveway is on an incline, don't even have a level spot to do it.

LizardKing · **Joined:** Mon Jul 18, 2011 6:07 am **Posts:** 332

I assume that you are trying to get it done before the shocker run. Well, if you do most of the crawling on the cold ground

I can probably help you do this if you don't want to to drive to Brooklyn (sorry 718)

I can't remember what you are installing... what kit did you buy?

ThorX · **Posted:** Fri Feb 20, 2015 8:29 am

The PRG coilover package, radflo coilovers, rear bilsteins, aal, and cam bolts. I don't mind crawling around on the ground. Just appreciate the knowledge and experience from someone who has done this before.

BKxterra718 · **Posted:** Fri Feb 20, 2015 1:17 pm

no worries mate. good to see our brothers helping out their neighbors. besides its better to stay closer to home as possible after such modifications

LizardKing · **Joined:** Mon Jul 18, 2011 6:07 am **Posts:** 332

Well your cam bolts are probably rusted since we are smack dab in the middle of the salt belt. To do it right we would need a set of LCAs and a sawzall.... I have a sawzall but I am not sure I am prepared to tackle that task in this fucking cold, laying in the ice and mud in my driveway since it is sort of tedious.

Anyone in else in the area have a garage we can occupy? Or at least a semi level spot without mud/ice/salt puddles?

You could persuade me to do the rest of it ( or at least supervise :mrgreen:

) but you just got new tires too, right? Probably not the best idea to drive it around without a decent alignment on new tires.

ThorX · **Posted:** Fri Feb 20, 2015 3:49 pm

Have tires, not on yet, I was planning on putting them on the day of depending on the time we get done or the day after and then get the alignment at the same time. Someone with a garage sure would be fantastic even if it's not heated just to be out of the wind and ice

3" suspension lift assistance

Who is online