suspension lift mod day ny area

Blk11Xterra · **Posted:** Thu May 15, 2014 4:27 pm

Just ordered myself a prg suspension lift.......now ( in a couple weeks after it all arrives), I need some help, know how, and tools......calling on you...the Russian crew of Brooklyn

This is what we r in for....with the radflow upgrade in the rear

http://www.prgproducts.com/shop/product ... lover_kit/

Bklyn.X · **Posted:** Thu May 15, 2014 4:33 pm

I know nothing about 2nd Gens bro, nothing...

mixxali4 · **Posted:** Thu May 15, 2014 4:34 pm

I know nothig about 2nd gen but wtf how hard can it b......ill help

Bklyn.X · **Posted:** Thu May 15, 2014 4:39 pm

mixxali4 wrote:

I know nothig about 2nd gen but wtf how hard can it b......ill help

Maybe you can get "H" ta take the lead...

mixxali4 · **Posted:** Thu May 15, 2014 4:42 pm

I think he could help ill c him monday lets c what he says

Sent from my SAMSUNG-SGH-I537 using Tapatalk

Bklyn.X · **Posted:** Thu May 15, 2014 4:46 pm

mixxali4 wrote:

I think he could help ill c him monday lets c what he says

Sent from my SAMSUNG-SGH-I537 using Tapatalk

He'll say "as long as Tony and Jus ain't there!"

mixxali4 · **Posted:** Thu May 15, 2014 4:50 pm

Last time I cn him he was ok about it

Sent from my SAMSUNG-SGH-I537 using Tapatalk

Bklyn.X · **Posted:** Thu May 15, 2014 5:06 pm

must have forgot...

mailman · **Joined:** Wed Sep 25, 2013 11:16 pm **Posts:** 16

beam me up Scotty :shock:

Where and when ?

Blk11Xterra · **Posted:** Fri May 16, 2014 7:26 am

mailman wrote:

beam me up Scotty :shock:

Where and when ?

Well.....need to wait for delivery for when.....where.....could be AutoZone parking lot....or my place...
Although saying "I know nothing of 2nd gens" has me wondering if I should get it done

mixxali4 · **Posted:** Fri May 16, 2014 8:12 am

Blk11Xterra wrote:

mailman wrote:

beam me up Scotty :shock:

Where and when ?[/quote

Well.....need to wait for delivery for when.....where.....could be AutoZone parking lot....or my place...
Although saying "I know nothing of 2nd gens" has me wondering if I should get it done

Me never did nothing on 2nd gens so I dont know how much help I can b

Yellow07s · **Posted:** Fri May 16, 2014 8:57 am

It should be a piece of cake for you guys, I have done many of them in my drive way in a few hours.

BKxterra718 · **Posted:** Fri May 16, 2014 3:36 pm

eh, make sure there's plenty of heinekens and parliments mang

www.justinandersdenmark.com

TomsRedX · **Posted:** Sat May 17, 2014 9:42 pm

Aint nothin but a thing, take bolts off, replace parts and put bolts back on.

Front lower shock bolts are extremely tight. 1/2" drive breaker bar, cheater pipe and all your muscles will be needed. Or a good air gun.

The rear bolt on the drivers side UCA can be removed without cutting if you use a pry bar and push the steering shaft over some.

Are you doing cam bolts too? You may need them for alignment.

C clamps will be needed for the AAL. May need longer U bolts also. Make sure you retorque the u bolts after you drive about 50 miles or so.

Check the rear brake lines at full droop when you are done to see if you need the extended ones. Watch your ABS lines too, I had to leave some of the keepers loose.

mixxali4 · **Posted:** Sat May 17, 2014 11:15 pm

Sounds crazy :oops:

suspension lift mod day ny area

Who is online