Need help with body lift B4 NORTHERN EXPOSURE run

theplasticone · **Posted:** Fri Aug 23, 2013 9:05 am

You gotta see if you can get in touch with Rook and Hoagie, I hear they can do a BL in two hours.

firedawg225 · **Posted:** Fri Aug 23, 2013 9:29 am

theplasticone wrote:

You gotta see if you can get in touch with Rook and Hoagie, I hear they can do a BL in two hours.

I need one too. got the kit. just would like some help. My new rims and wheels rub on the fender right in the back corner. Just ever so little to annoy you.

Ricel · **Posted:** Sun Aug 25, 2013 8:15 am

If you were up here, id do it in prob 4 with an hour of drinking involved.

CISO1969 · **Posted:** Mon Aug 26, 2013 9:07 am

curt. That could work lol you still have some spare parts I was after and i meesed up because i understand you were at ECXC too

Ill check with Rook and Hoagie too.

Lee

MtDewMike · **Posted:** Mon Aug 26, 2013 9:19 am

Rook and hoagie are second gen guys, so I'm not sure how they'd be with a first gen body lift.

There is a checklist around here that Donald put together a while ago for first gen body lift installs. I'll see if I can find it.

MtDewMike · **Posted:** Mon Aug 26, 2013 9:26 am

Here you go: first gen body lift check list

BKxterra718 · **Posted:** Mon Aug 26, 2013 12:00 pm

If you wana drive to BK we can instruct you every step of the way. This is a 2" lift you talkin bout yes?

CISO1969 · **Posted:** Tue Aug 27, 2013 8:57 am

BKxterra718 wrote:

If you wana drive to BK we can instruct you every step of the way. This is a 2" lift you talkin bout yes?

Yes 2 inch lift. Lets talk about a mod day as we will probably need at least 3 people or so right?

And instruct is ok- Ill swing hammers, twist wrenches all that is needed- but I am sure ill need help too to get it done quickly and also good to have experienced people working along side me

This past weekend had some snags with a job i was working on that everyone claims is a 2 - 4 hour job....it took me 20 hours over 2 days. But as i said I hit snags--like having to finesse cutting off a bolt head without damaging surroundng bits etc

So helping me means we do it in 4 hours versus 12?

Also MTDewMike--thanks for that link!

Thanks,

Lee

BKxterra718 · **Posted:** Tue Aug 27, 2013 11:17 am

CISO1969 wrote:

BKxterra718 wrote:

If you wana drive to BK we can instruct you every step of the way. This is a 2" lift you talkin bout yes?

Yes 2 inch lift. Lets talk about a mod day as we will probably need at least 3 people or so right?

And instruct is ok- Ill swing hammers, twist wrenches all that is needed- but I am sure ill need help too to get it done quickly and also good to have experienced people working along side me

This past weekend had some snags with a job i was working on that everyone claims is a 2 - 4 hour job....it took me 20 hours over 2 days. But as i said I hit snags--like having to finesse cutting off a bolt head without damaging surroundng bits etc

So helping me means we do it in 4 hours versus 12?

Also MTDewMike--thanks for that link!

Thanks,

Lee

K lemme talk to the Brooklyn crew and we see what days good. Just so you know its prob gona be on a Sunday... and at Autozone...

CISO1969 · **Posted:** Thu Aug 29, 2013 7:56 am

Sunday is fine for me. Autozone is fine for me. Heck Kennedy Airport would work too if that's where I needed to go to get help doing this

BTW I lived in Brooklyn until I was 2. Ocean Parkway and Kings Highway. I hear that area has changed a lot though. (FYI we moved to Carle Place and then grew up in Syosset--left when I was 28) so we New Yorkers need to look out for each other-just ignore that Ive been in PA so long and dopnm't have a NY accent until I get angry

Let me know and thank you!

Lee

BKxterra718 wrote:

CISO1969 wrote:

BKxterra718 wrote:

If you wana drive to BK we can instruct you every step of the way. This is a 2" lift you talkin bout yes?

Yes 2 inch lift. Lets talk about a mod day as we will probably need at least 3 people or so right?

And instruct is ok- Ill swing hammers, twist wrenches all that is needed- but I am sure ill need help too to get it done quickly and also good to have experienced people working along side me

This past weekend had some snags with a job i was working on that everyone claims is a 2 - 4 hour job....it took me 20 hours over 2 days. But as i said I hit snags--like having to finesse cutting off a bolt head without damaging surroundng bits etc

So helping me means we do it in 4 hours versus 12?

Also MTDewMike--thanks for that link!

Thanks,

Lee

K lemme talk to the Brooklyn crew and we see what days good. Just so you know its prob gona be on a Sunday... and at Autozone...

CISO1969 · **Posted:** Tue Sep 10, 2013 10:46 am

Any word on the 15th? I need to start PB Blasting and Kroiling bolts but only if this is going to happen.

Lee

BKxterra718 · **Posted:** Tue Sep 10, 2013 11:40 am

We will be working on things this weekend. I believe both Saturday and Sunday. Only thing is I dont have power to make path for 4 lo, and drop your radiator down and remount. Waiting to see if one of us that does will be able to make it.

mixxali4 · **Posted:** Tue Sep 10, 2013 12:09 pm

If u will call me when its ready for that I will shoot by and let u use some powerr of my truck.....but I thought u said its pointless to have 110v in the xterra :fingerbang:

BKxterra718 · **Posted:** Wed Sep 11, 2013 11:28 am

mixxali4 wrote:

If u will call me when its ready for that I will shoot by and let u use some powerr of my truck.....but I thought u said its pointless to have 110v in the xterra :fingerbang:

Me say nothink :boobs2:

CISO1969 · **Posted:** Wed Sep 11, 2013 11:38 am

I thought most guys didnt drop the radiator or move it for the two inch lift? I dont have the bracket for that (I dont think I do)

So you need a compressor or a generator?

I don't have access to either rioght now unfortunately.

Lee

Need help with body lift B4 NORTHERN EXPOSURE run

Who is online