May18th Potential-- Looking for host

Svendog · **Posted:** Sun May 11, 2008 6:39 am

xtraveler192 wrote:

Oh, so I need the bolts, nuts, and washers?

I just have the bolts and nuts right now.

Ok, I guess I can put it off for a week or two.

The washers are just in case.
I snapped the tooth off of two of mine (One on each side) and the wheels couldn't get aligned. So, it's cheap insurance to have them.

As for the waiting, everyone who's reading this, toss in whatever tools you think we'll need, extras (never sieze, MAPP, etc) to do the SL. As long as we have the tools there, I think we're in good shape.

Also, let's get a list togther of people who could show and, if not in CT, where else we could do this. My garage opening is too short to get the truck in, so we'd need good weather at my place to get this done.

Shmittey · **Posted:** Sun May 11, 2008 7:31 am

Yeah I have a lot of crap to install too so I think out of practicality I will keep that stuff separate from his mod day. I think I still have extra torsion anchors and adjusters if they pose a problem again.

Mike do you have compressed air at your place?

xtraveler192 · **Posted:** Sun Jun 01, 2008 10:34 am

So I guess that I'll try to bring this back to see if another day might work out.

Pretty much I'm willing to do any day now, no matter what.

Wickedsurf · **Posted:** Sun Jun 01, 2008 11:14 am

mtdewmike wrote:

xtraveler192 wrote:

mtdewmike wrote:

xtraveler192 wrote:

mtdewmike wrote:

How far is Brian's place?

Where does Brian live? I'll look it up.

If he lives near Jesse in Abington (for some reason I thought he did), I'm willing to make that drive.

Brian lives down in Rhode Island. I can't remember what the town is. Something like exit 7 off of 95. Jesse is 7 minutes away from me. I can check with him; I don't think he's made it over to this board yet.

I could probably do Brian's. Looks right around the 2 hour mark.

Anyone have contact with him to see if he would host?

I'll try to call both Brian and Jesse within the next day or so.

i dont know if you guys were talking about me or another brian, but i unfortunatly had to move out of narragansett, and im back down in North New Jersey for the time being

MtDewMike · **Posted:** Mon Jun 02, 2008 7:11 am

I was talking about another Brian.

Wickedsurf · **Posted:** Mon Jun 02, 2008 9:44 am

thats what i figured just checking

xtraveler192 · **Posted:** Thu Jun 12, 2008 11:25 am

Just wanted to see before starting to look for other options to put the lift in if in the upcoming weeks if anyone has some free time/ place to work with me?

Svendog · **Posted:** Thu Jun 12, 2008 5:06 pm

How's everyone for the 22nd at my place (Suffield, CT)? If that could work out, I have the space and (hopefully) the tools we'd need.

XVTer · **Posted:** Thu Jun 12, 2008 10:58 pm

I could probably do it

MtDewMike · **Posted:** Fri Jun 13, 2008 6:51 am

I'll check with Cindi to see if we're doing anything that day.

xtraveler192 · **Posted:** Sun Jun 15, 2008 2:24 pm

June 22nd sounds great to me.

xtraveler192 · **Posted:** Thu Jun 19, 2008 11:56 pm

Any chance we can work to get final numbers for who might be available?

Svendog · **Posted:** Fri Jun 20, 2008 5:04 am

I'm ready for hosting on my end.

I don't have a compressor on site, so we'll have to do use muscle power on some of the items, but I do have my share of power tools (sawzall, cutoff wheel, etc).

MtDewMike · **Posted:** Fri Jun 20, 2008 7:02 am

I apologize - I forgot to reply in thread sooner. I asked Cindi about this Sunday if we had something planned, and she gave me this look like I was in trouble or should have remembered. "Uh, yeah, it's Kylie's birthday party." It's her niece, and she's turning 1. So, Eric, unfortunately, I can't make it to help out with this.

XVTer · **Posted:** Fri Jun 20, 2008 8:06 am

hmm, what time were you thinking of starting?

May18th Potential-- Looking for host

Who is online