mixxali4 wrote:
u got it Rome!!!hey Mike how long is suspension lift i know that ill do rear in 1 1/2 huors but how bad is the front?uca and re index torsions?
The front can be quick or long - depending upon what it is that you want to do with regards to the old parts. If you want to do it quickly, get a plasma torch and cut the UCAs at the top (not the brackets, just where the bolts run through). If you want to take fewer chances that something will burn through, get a sawzall and some very tough blades (at least a dozen) and then cut the bolts off since they are likely stuck on the inside of the bushings and no amount of pounding will get them out.
Reindexing can be a pain in the rear if your t-bars are semi rust welded in there. But, if you PB Blast the hell out of them for a couple of weeks before trying (both at the front and rear), they tend to pop out and then it's just a matter of getting the anchors lined up and cranking away.
If you decide to cut the bolts and PB Blast the t-bars, the front end can be done in about 4 hours. If not, it can be an all day effort that will be frustrating and annoying.