North East Xterra Club http://www.nexterra.org/forums/ |
|
Hi-Lift Base options http://www.nexterra.org/forums/viewtopic.php?f=62&t=9070 |
Page 1 of 1 |
Author: | RomeoEJ [ Fri Sep 09, 2016 6:39 pm ] |
Post subject: | Hi-Lift Base options |
I know there are other options out there for the hi-lift base. I was wondering what people prefer? I personally like the fact the Relentless Fab and Rocker Offroad bases actually attach to the jack. Thoughts? Hi-Lift base (original) http://www.4wheelparts.com/Winches-Winch-Accessories/Hi-Lift-Jack-Off-Road-Jack-Base-ORB.aspx?t_c=18&t_s=190&t_pt=5683&t_pn=H/LORB Relentless Fabrication base http://www.relentlessfabrication.com/collections/recovery-gear/products/high-floatation-steel-hi-lift-base Rocker Offroad http://rockeroffroad.com/hi-lift-jack-base/ Alien base http://www.ruffstuffspecialties.com/catalog/R2166.html?gclid=CjwKEAjwu8m-BRDM8KTcjdj8qy0SJACdjSZpxnBaId4nnlPVvKwl10wqjh0OPl0hdwhmz_7Y7TQsdRoCWgDw_wcB |
Author: | Bklyn.X [ Fri Sep 09, 2016 8:10 pm ] |
Post subject: | Hi-Lift Base options |
Thoughts? I couldn't bring myself to pay $40 for the hi lift one. Mike gave me one he won that I think I've used twice. Relentless doesn't look much better IMHO. Rocker looks like the best but $80? That seems a bit much for some welded scrap. $179 for the Alien? What, are you stoned? Sent from my iPhone using Tapatalk |
Author: | MtDewMike [ Fri Sep 09, 2016 8:12 pm ] |
Post subject: | Re: Hi-Lift Base options |
The welded one does look the best, but it's a little high. Maybe bandit should start fabbing some. Sent from my SAMSUNG-SGH-I337 using Tapatalk |
Author: | RomeoEJ [ Fri Sep 09, 2016 8:22 pm ] |
Post subject: | Re: Hi-Lift Base options |
Hahaha I didn't say I was buying these but they are options out there that I found. If I was to get one I would purchase the Relentless or Rocker ones but like you said these are expensive. I might just carry a 4 x 6 piece of wood or similar Sent from my iPhone using Tapatalk |
Author: | Bklyn.X [ Fri Sep 09, 2016 8:54 pm ] |
Post subject: | Hi-Lift Base options |
I did not realize the relentless one can be flipped |
Author: | Fiachra [ Sat Sep 10, 2016 4:18 am ] |
Post subject: | Re: Hi-Lift Base options |
Have the hi lift one. Light weight and stable. I'll stick with it. (Sent from Willoughby) |
Author: | Bass4Runner [ Sat Sep 10, 2016 9:09 pm ] |
Post subject: | Re: Hi-Lift Base options |
Still have my wood...lol I do like the Rocker one I'll have to make something like it over the winter... |
Author: | XVTer [ Mon Sep 12, 2016 8:31 am ] |
Post subject: | Re: Hi-Lift Base options |
I've used one of the red ones in the past, but, like Ernie, I still employ the 'all-natural' wood solution, lol. I usually carry two to four 1'x1' 3/4" plywood pieces in my toolbox for just this or to support 3-ton jack stands. Those other pieces are pretty sweet but man, those prices are out of hand~ |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |