North East Xterra Club http://www.nexterra.org/forums/ |
|
Xterra Leaf springs http://www.nexterra.org/forums/viewtopic.php?f=17&t=9296 |
Page 1 of 1 |
Author: | Frontier4x [ Sat May 06, 2017 8:27 am ] |
Post subject: | Xterra Leaf springs |
Does anyone have a set of old 2nd gen leafs? Frontier are spring over axle, and the xterra leafs can add some lift and beef up a stock leaf pack. Let me know |
Author: | BKxterra718 [ Sat May 06, 2017 11:07 am ] |
Post subject: | Re: Xterra Leaf springs |
You gona have to trim them a bit too. after axle wrapping at the last ecxc now the second leaf under the main is almost just as long. I called alcan for the sizes. |
Author: | Frontier4x [ Sat May 06, 2017 6:11 pm ] |
Post subject: | Re: Xterra Leaf springs |
Yeah im lookin into leaf packs, i saw a few threads on clubfrontier about making hybrid packs... My leafs are ridiculously fatigued, i fugure this will add strength and lift. I know youre in a 1st gen, were your originals spring under? |
Author: | BKxterra718 [ Sun May 07, 2017 11:32 am ] |
Post subject: | Re: Xterra Leaf springs |
Frontier4x wrote: Yeah im lookin into leaf packs, i saw a few threads on clubfrontier about making hybrid packs... My leafs are ridiculously fatigued, i fugure this will add strength and lift. I know youre in a 1st gen, were your originals spring under? Bought my 2000 frontier springs were flat, slapped in my xterra pack worked nice but little issues i wasnt aware of. Springs over axle. I did a ubolt flip using the xterra plate and ubolts to hug the axle. Then had a buddy weld the bumpstop on the plate, and shock tabs on the axle. My own design ey :) |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |