North East Xterra Club http://www.nexterra.org/forums/ |
|
Frame Stiffeners..WHERE?! http://www.nexterra.org/forums/viewtopic.php?f=17&t=6326 |
Page 1 of 2 |
Author: | JesseeS [ Thu Feb 09, 2012 7:43 pm ] |
Post subject: | Frame Stiffeners..WHERE?! |
Anybody know where I can get a set or does anybody have a set around, every place says they've been discontinued. Thanks in advance! |
Author: | mixxali4 [ Thu Feb 09, 2012 8:54 pm ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
mayb im wrong but if u have a hitch ushould have it ! once again i can b wrong |
Author: | JesseeS [ Thu Feb 09, 2012 9:58 pm ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
My friend you are correct. Unfortunately that was only if your xterra included the towing package which mine did not, I got the hitch from a junk yard |
Author: | mixxali4 [ Fri Feb 10, 2012 7:18 am ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
Sorry dude I don't know or wait a second its preaty much a peace of metal that goes on frame can't u just ge lental from homo depote drill holels and use on the inner part of the frame? |
Author: | JesseeS [ Fri Feb 10, 2012 2:14 pm ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
Thats exactly what I was thinking. If I can't find someplace that sells them or anyone with them in a couple of days I'll just make my own. But I definitely need them before I put my bumper on there |
Author: | EricD [ Fri Feb 10, 2012 4:09 pm ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
This might be a newbie question but....why do you need frame stiffeners to put your bumper on? What kind of bumper? |
Author: | JesseeS [ Fri Feb 10, 2012 5:28 pm ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
On older xterras('00-'04) the rear frame horns are c channels. They can be bent more easily because of that fact they're not boxed. The frame stiffeners slide inside to make it more rigid. I'm building a rear bumper with tire carrier which is alot more weight on those horns than intended. Some people say you don't need them, it's more of a precaution thing |
Author: | mixxali4 [ Fri Feb 10, 2012 7:36 pm ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
how much is it gonna run u? |
Author: | JesseeS [ Fri Feb 10, 2012 9:12 pm ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
The tire carrier? |
Author: | mixxali4 [ Fri Feb 10, 2012 9:43 pm ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
every thing all 2gether? |
Author: | JesseeS [ Fri Feb 10, 2012 9:49 pm ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
I'm not sure how much yet cuz I haven't purchased steel yet. But I think in the $300-400 range. Once it's completed I'll give you a more accurate number |
Author: | mixxali4 [ Fri Feb 10, 2012 11:00 pm ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
u got the drawing yet? |
Author: | JesseeS [ Sat Feb 11, 2012 3:06 am ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
I do have a drawing. I used to have a program on my computer to do it all 3D but the license expired so I free handed it. I'll try to scan it to my computer sunday |
Author: | mixxali4 [ Sat Feb 11, 2012 7:22 am ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
cool !good luck with ur build |
Author: | RIXterra [ Sat Feb 11, 2012 12:48 pm ] |
Post subject: | Re: Frame Stiffeners..WHERE?! |
Why not just have a metal shop or friend make them. It's really a pretty simple design. http://www.courtesyparts.com/images/ins ... _pg03.html |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |