I am holding a Mod Day at my shop in N. Kingstown, RI

I will be re-wiring all of my Roof Lights and installing my Blue Torch FabWorks Diff cover.

Bobby is swinging by tomorrow to upgrade his shackles to PRG Adjustables and something else ( totally forgot what it was but he'll chime in ).

I will also be doing some work on the 10th as well. Mostly under the hood to figure out why I get a P0171 code. Never had it pop up before and then into the shop and CODE.

Also dealing with my CB

If anyone is up for an evening of wrenching PM me and I'll give you the address of the shop.

Mod Day starts after 5pm ( have to finish my work day first ). We will be in a heated warehouse with lots of tools.

Hope to see some of you there

DaveP

I may join you...

I have some noises coming from the Xterra that I need looked at... Maybe I'll get the stuff so I can hook up the lights finally!!!


Maybe an oil change / tranny,xfer case change???

Do you have Skids On? LOL

Good thing we have a Used oil recovery tank.

I think we can handle the fluid changes. I'll need to switch back and forth so we can get Both of you Upgraded. I don't see a problem and with Bobby coming a little later we could get a good jump on it.

Let me know

Bobby will chime in but think we can handle this

I can / may have to wait on the fluid change...

But I'll play with the lights and try to figure out the rattle up front!

Up to you

Feel free to bring all the fluids just in case we have time.

See you tomorrow and if need be we have Wed as well and maybe even Thurs.

I'm getting ready for the Shocker Run this weekend at Rausch so I may be working on the X all week.
Leaving Friday Night

Guess I should have looked at the date... I was thinking the weekend...

I'm working the overnight tonight so I usually spent the next night with the family and my lil girls...

I may try and make it but...


Will have to get together another day and do something!!!

I've also gotta re-install my skid plates and diff skid. If we have time, I'd like to re-wire my roof lights.

Roadkill, if you do make it, I also brought that stock roof rack cross-bar for ya.

Dave, is there a car wash near the shop? I'd like to spray off the undercarriage before re-installing the skids.

Oh, and I also grabbed my spare half-shaft for ya, Dave.

B

We have a DIY wash down on Post rd. I also have a pressure washer here at the shop. May have to do some creative garden holes running as they left water in the outside hose.

DIY should work fine. See ya in a few hours.

I don't think I'm going to make it...

Can you leave them with him... I'll call a friend/SSW member and see if he will pick it up for me.

It's only one of the cross bars, but I will leave it with Dave.

Ok... Thanks, wish I could make it!!!

Bobby left an Hour or so ago.
Installed
PRG Shackles
Shrock Diif cov er back on
Shrock skids back on ( SS hardware )

I finished painting my BTF diff cover. 7 coats of prime and 5 coats of Alum color. Way excessive but just kept adding paint all day while I was working. LOL

I also finished making a new Roof light harness and will finish that up tomorrow.

Sorry we missed you rroadkill. Next time

Let me know about the cross bar. I also have 1 if you need 2 ( kinda works but it yours if ya need a second ).

I'll be working on the Rig again tomorrow if anyone is up for it.

Later

DaveP

Thanks again for hosting, Dave. It's good to have that stuff done, especially before we get dumped on today

Thanks Dave...

I'll let you know when I come to town...

I have your cell #...