| North East Xterra Club http://www.nexterra.org/forums/ |
|
| Mod Day This Fall http://www.nexterra.org/forums/viewtopic.php?f=10&t=2873 |
Page 7 of 8 |
| Author: | Inurteeth2 [ Sun Nov 09, 2008 2:06 am ] |
| Post subject: | |
Yea everything went well! i Got home around 8 and i have some pics to post. I'll try doing them tomorrow. Again a Big thanks to Scott, Mike Don, and Louie for your help! |
|
| Author: | Loudog78 [ Sun Nov 09, 2008 10:45 am ] |
| Post subject: | |
No problem Derek anytime it was a pleasure to meet all of you and work on your trucks. |
|
| Author: | Loudog78 [ Sun Nov 09, 2008 10:56 am ] |
| Post subject: | |
Scott can you check your garage I think I left my drill bits there? |
|
| Author: | dmpmfd [ Sun Nov 09, 2008 12:47 pm ] |
| Post subject: | |
Loudog if yours were the set used to drill out the bumper holes, in the black metal case, then it was sitting on the workbench just to the left of the miter saw. And I do want to say... Thank You everyone who showed up to help  Don't think all the projects would have gone as quickly as they had if you hadn't shown up. Very big thanks to Sven for being so insistent in putting the skid plate bolt in. 
|
|
| Author: | Svendog [ Sun Nov 09, 2008 1:45 pm ] |
| Post subject: | |
My pleasure It would have bugged me to have it not go in. |
|
| Author: | daggerdoggie [ Sun Nov 09, 2008 4:37 pm ] |
| Post subject: | |
First of all, thanks for all the help Mike and Lou, with no mods for your own trucks, you guys did a lot of work and everything went smoothly. Lou, I do have your drillbits and Derick, I have your sweatshirt. Mike, did you pick up your cardtable and coffe maker? |
|
| Author: | Svendog [ Sun Nov 09, 2008 4:48 pm ] |
| Post subject: | |
I did get the card table and coffee maker. Both are back in the basement - waiting for the next time they're needed. And, it was a good weekend. |
|
| Author: | Bklyn.X [ Sun Nov 09, 2008 10:34 pm ] |
| Post subject: | |
Sounds like a good time. What was this? Svendog wrote: ... a Shrock bumper relocation...
|
|
| Author: | Svendog [ Mon Nov 10, 2008 6:35 am ] |
| Post subject: | |
We moved Don's rear bumper up the 2 inches to close the gap from the BL |
|
| Author: | Inurteeth2 [ Mon Nov 10, 2008 10:18 am ] |
| Post subject: | |
daggerdoggie wrote: First of all, thanks for all the help Mike and Lou, with no mods for your own trucks, you guys did a lot of work and everything went smoothly.
Lou, I do have your drillbits and Derick, I have your sweatshirt. Mike, did you pick up your cardtable and coffe maker? Scott, i thin i left more than my sweatshirt, i think i left my grey bag and some shoes... ? |
|
| Author: | MtDewMike [ Mon Nov 10, 2008 12:53 pm ] |
| Post subject: | |
So, what about pics of the rigs?? |
|
| Author: | Inurteeth2 [ Mon Nov 10, 2008 2:24 pm ] |
| Post subject: | |
There coming, but i'm at work and didn't bring my Camera. Then tonight i'm playing so it will have to be tomorrow. sorry |
|
| Author: | daggerdoggie [ Mon Nov 10, 2008 3:53 pm ] |
| Post subject: | |
Inurteeth2 wrote: daggerdoggie wrote: First of all, thanks for all the help Mike and Lou, with no mods for your own trucks, you guys did a lot of work and everything went smoothly. Lou, I do have your drillbits and Derick, I have your sweatshirt. Mike, did you pick up your cardtable and coffe maker? Scott, i thin i left more than my sweatshirt, i think i left my grey bag and some shoes... ? I'll look for them. We have so many shoes downstairs I wouldn't notice them. |
|
| Author: | dmpmfd [ Mon Nov 10, 2008 4:48 pm ] |
| Post subject: | |
mtdewmike wrote: So, what about pics of the rigs??
Actually my camera never even made it out of the truck. So the only pictures I would have are the after, which still need to be taken.  Besides with everyone's trucks there mine looked like the "little engine that could".
|
|
| Author: | Loudog78 [ Mon Nov 10, 2008 4:57 pm ] |
| Post subject: | |
Thaks Scott is there any way you can ship those out to me. Find out how much and I'll send you a check. My zip is 06032. |
|
| Page 7 of 8 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|